Tuning Foster fill port hard to reach

[Elgreco]

hi,

I have a Factor rc and the foster fitting where I have to connect my bottle or pump is seated deep and every time I am done filling I have to use a tool to pry the hose out. Is there something like an extension I can use?

 

[biohazardman]

One of these may werq for you.

https://utahairguns.com/extended-quick-disconnect-1-8-bsp-m20/

https://utahairguns.com/stainless-steel-extended-quick-disconnect-with-foster-fitting/

 

[Ezana4CE]

One of these may werq for you.

https://utahairguns.com/extended-quick-disconnect-1-8-bsp-m20/

https://utahairguns.com/stainless-steel-extended-quick-disconnect-with-foster-fitting/

What he said. Faced the same issue with a Brocock rifle and used needle nose pliers to remove the disconnect coupling. An extended foster fitting like the one in the link remedies that issue. 

 

[Elgreco]

Thanks guys!

 

[scratchcoobster]

Air Tanks Plus has them for $20 - same as the $35 ones from Utah.

 

[bltefft]

That's what I use to air up my Daystate Wolverines, dang near impossible to get the short female fitting off.

I got mine from Amazon, $17.00 (I have a prime membership)

https://www.amazon.com/Genrics-Extended-Charging-Release-Adapter/dp/B08DCPLLDH/ref=sr_1_1?crid=2GRZN8ZJ60JQC&dchild=1&keywords=extended+foster+fitting&qid=1621028540&sprefix=extended+fost%2Csporting%2C155&sr=8-1

 

[Bigragu]

When you get the extended foster fitting clamp on a Corbin clamp on it as the protruding tabs make it easy to pull the slide down when attaching or removing the fitting-

Your local auto parts store will have these.

 

[Elgreco]

Thanks for the tip!