Hello there peeps. I’ve got another FX Impact MK1 problem after fixing two other issues. The two issues I fixed included massive regulator creep (replaced the regulator), and leaking from a small hole behind the safety where you can see the Belleville washers if you use a flashlight.
Sooo, the newest issue I’ve encountered is that when I shoot, it sounds like the stereotypical hammer hitting the anvil. The hammer spring has completely gone from being unable to move (near maxed out hammer spring tension), to now completely loose. I attempted to put the regulator near 140 bar, and it happened as I hit around 140.
Update: after I lowered the reg pressure (removed the air and lowered), the noise is now gone....why did it make that noise in the first place?
Sooo, the newest issue I’ve encountered is that when I shoot, it sounds like the stereotypical hammer hitting the anvil. The hammer spring has completely gone from being unable to move (near maxed out hammer spring tension), to now completely loose. I attempted to put the regulator near 140 bar, and it happened as I hit around 140.
Update: after I lowered the reg pressure (removed the air and lowered), the noise is now gone....why did it make that noise in the first place?