I am interested in fitting a Smooth Twist X barrel to an FX Boss. The diameter of the barrel sleeve apparently needs to be reduced about 0.125mm x 5/8" long to fit the action block. The threaded wall thickness is not thick enough but might hold.
I read that member "Glem.Chally" did some fitting but could find more details as to what exactly was done. The ST barrel is about 14.0mm diameter and 13.75mm where it fits into the action. The STX barrel coupling and barrel inlet are fine with 13.75mm but the STX barrel sleeve is 14.0mm diameter and needs to enter the Boss action block about 5/8".
Can anyone provide some information ?
I read that member "Glem.Chally" did some fitting but could find more details as to what exactly was done. The ST barrel is about 14.0mm diameter and 13.75mm where it fits into the action. The STX barrel coupling and barrel inlet are fine with 13.75mm but the STX barrel sleeve is 14.0mm diameter and needs to enter the Boss action block about 5/8".
Can anyone provide some information ?