First day with Panthera .30 700mm

you could install a Truss rod from the lower base mount to the center of the extended mount, maybe a couple R/C car Heim joints with a threaded rod
1674063770477.png
 
Why take off the barrel band ? ......and then expect a long unsupported rail not to flex ?

Looks like going out of the way to create a problem to me.
I'm very interested to see the same video from the OP, but with that "bridge" or shroud support or whatever is installed as designed.

The band bolts to the shroud... Then goes all the way around the barrel, not touching the barrel.. and bolts to itself again. It adds nothing. It's not a support.

But I really don't see the flex being a issue.

The Arca rail is what is flexing on the rifle. The barrel is stiff to the receiver so you shouldn't see much issue with any POI issues. You will more than likely wear a mark on the shroud/plenum after a while.

The ones up here in ND haven't had any issues with the flex and you know FX has a fix or something in the works. Much like the carbon additions and other things for the M3 that they came out with.

Yeah it's really not a issue.

Curious to see him actually find the accuracy nodes and get the gun shooting well. Not surprised to see a fresh liner that hasn't been clean and leaded in ... No tuning whatsoever... Shoot all over with some slugs just thrown at it. Slugs ain't pellets. They take some finesse
 
I know personally with the 22 that it will shoot pellets quite well at 50 yards. Shooting with a local guy that has been using pellets to get things settled in with the barrel as well as the regulator and valve. Once things smoothed out he went with the slugs and was hammering the same spot from 50 out to 100. When spring hits we will take it out further, but for right now it was doing great
 
  • Like
Reactions: Blake1521
Funny to see all the FX fan bois in full force lol. The last part of your post is the best part, oh the irony :ROFLMAO:
Fanboy ? ....heck there's not been an FX gun that interested me in forever and I actually been critical of FX style for sometimes, but seems that people now are grasping at straws to complain and this thread sure is that way
 
  • Like
Reactions: yenniedn
Fanboy ? ....heck there's not been an FX gun that interested me in forever and I actually been critical of FX style for sometimes, but seems that people now are grasping at straws to complain and this thread sure is that way
I don't know which of the following is worse:
-being an actual FX fan boi -OR-
-being labeled an FX fan boi the second you open your mouth to say anything positive about anything FX -OR-
-being the guy that calls everyone that has a single positive thing to say about FX an FX fan boi
 
  • Haha
Reactions: Nomadic Pirate 66
The band bolts to the shroud... Then goes all the way around the barrel, not touching the barrel.. and bolts to itself again. It adds nothing. It's not a support.

But I really don't see the flex being a issue.



Yeah it's really not a issue.

Curious to see him actually find the accuracy nodes and get the gun shooting well. Not surprised to see a fresh liner that hasn't been clean and leaded in ... No tuning whatsoever... Shoot all over with some slugs just thrown at it. Slugs ain't pellets. They take some finesse
It was tunned for that speed with the 61.5 grainers. Not just slugs randomly througn it. Groups were way worse than what is pictured before tunning to that speed.
 
Why take off the barrel band ? ......and then expect a long unsupported rail not to flex ?

Looks like going out of the way to create a problem to me.
It does the same thing with the top piece on. It’s not a barbell band, and serves no purpose other than as a space to mount accessories to.
 
  • Like
Reactions: MongooseV8
I don't know which of the following is worse:
-being an actual FX fan boi -OR-
-being labeled an FX fan boi the second you open your mouth to say anything positive about anything FX -OR-
-being the guy that calls everyone that has a single positive thing to say about FX an FX fan boi
Imo the issue is defending bad design and attacking others that disagree, which happens a lot here. I dont mind being the "worst guy" I have a thick skin :devilish:

And the entertaining part to me is the misunderstanding some people have while calling other people names.
 
I guess the real question would be if you base your position on one rifle or wait to see what others may have to say. The video I posted earlier shows an extremely different perspective in comparison to this rifle, albeit .25 versus .30.
If you have any experience with slugs you know they are not pellets and to that fact shoot like them. One can shoot pellets exceptionally well and may not have the same success with slugs.
I am definitely not negating the OP’s experience with his rifle but just not making an overall decision on all of the rifle’s because his isn’t what he expected. Sometimes waiting is better than being first…
 
I guess the real question would be if you base your position on one rifle or wait to see what others may have to say. The video I posted earlier shows an extremely different perspective in comparison to this rifle, albeit .25 versus .30.
If you have any experience with slugs you know they are not pellets and to that fact shoot like them. One can shoot pellets exceptionally well and may not have the same success with slugs.
I am definitely not negating the OP’s experience with his rifle but just not making an overall decision on all of the rifle’s because his isn’t what he expected. Sometimes waiting is better than being first…
There is also the variable of the shooter. For a lot of people those would be good groups, and for others they need tighter. But for right out of the box first impressions I think the OP info is reasonable, maybe even realistic. We already know the Panthera will be a laser in most cases.