Hey guys,
I've encountered an issue with my new Mk2 which I had about two weeks. Here is a video of the issue:
https://youtu.be/WWkj6C9t4ho
After the trigger is pulled, the gun won't fire, but the hammer spring can be heard moving. Air can be heard moving through the front area of the gun (barrel or gas tank? idk). Immediately after the shot, as I uncock, there is a hissing noise and air/steam that releases from the butt of the gun. As far as I know, no mods were performed on the gun, so I am not sure what is causing this issue.
The regulator is currently at 98ish (slightly below 100). The wheel is set at Max. I have not modded or tweaked any parts of this gun. I have only used factory settings.
When I initially got the gun, the current issue occurred, but I believe that was caused by shrapnel (probably caused by two pellets loaded in the barrel and firing at once) in the barrel which prevented the gun from firing properly. I took out the barrel and removed the shrapnel and it solved the problem. Between that initial issue and this current issue, the gun fired off 100+ shots perfectly fine.
Does anyone have any idea what the problem is? I would greatly appreciate your help.
I've encountered an issue with my new Mk2 which I had about two weeks. Here is a video of the issue:
https://youtu.be/WWkj6C9t4ho
After the trigger is pulled, the gun won't fire, but the hammer spring can be heard moving. Air can be heard moving through the front area of the gun (barrel or gas tank? idk). Immediately after the shot, as I uncock, there is a hissing noise and air/steam that releases from the butt of the gun. As far as I know, no mods were performed on the gun, so I am not sure what is causing this issue.
The regulator is currently at 98ish (slightly below 100). The wheel is set at Max. I have not modded or tweaked any parts of this gun. I have only used factory settings.
When I initially got the gun, the current issue occurred, but I believe that was caused by shrapnel (probably caused by two pellets loaded in the barrel and firing at once) in the barrel which prevented the gun from firing properly. I took out the barrel and removed the shrapnel and it solved the problem. Between that initial issue and this current issue, the gun fired off 100+ shots perfectly fine.
Does anyone have any idea what the problem is? I would greatly appreciate your help.