Ok I have an EDgun Leshiy and an air Venturi 100 cu in tank @ 4500 psi. I can only get the gun to fill up to 187 bar. What is my problem here?
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Filling issue??
- Thread starter slippy5150
- Start date
Two quick questions, did you accidentally reset the edmu zero? And check vanother gun your gauge on the tank may be nackered,. You won't get but a few fills on a small tank but it should take it to 270-250 three or five times...
Upvote 0
Yeah, 187 according to the tank gauge or guns gauge? Are you sure your tank has more pressure in it than the 187?
I wouldn't presume that either gauge is precise unless they match up pretty well.
Any leaks when filling? You be able to hear the hiss.
I wouldn't presume that either gauge is precise unless they match up pretty well.
Any leaks when filling? You be able to hear the hiss.
Upvote 0
That seem about right. 187 bar is right up where 2900 psi give or take. The av tank is regulated for only 2900 psi so people don't overfill. Just cause the av tank holds 4500 psi doesn't mean it will fill your gun 3000-4500 psi. Cause it's regulated for only 2900 psi maximum fill. Always do your research before you buy so you don't go, why why why...
Upvote 0
2fast2furious
has it right. 187bar is 2712 or so psi so your fill is complete as far as a 3K psi regulator is concerned. It's not unusual for gauges or regs to be off a little. Air Venturi has high output valves on some of their tanks that will fill to whatever is in the tank as well. If we had a pic or link it would be a good thing.
This one is regulated
https://www.amazon.com/Ninja-PCP-Fill-Station-Paintball/dp/B00JANV4K8/ref=sr_1_1?dchild=1&keywords=air+venturi+fill+station&qid=1583363112&sr=8-1
This one is not
https://www.pyramydair.com/s/a/Air_Venturi_100_cu_in_Carbon_Fiber_Tank/8955
has it right. 187bar is 2712 or so psi so your fill is complete as far as a 3K psi regulator is concerned. It's not unusual for gauges or regs to be off a little. Air Venturi has high output valves on some of their tanks that will fill to whatever is in the tank as well. If we had a pic or link it would be a good thing.
This one is regulated
https://www.amazon.com/Ninja-PCP-Fill-Station-Paintball/dp/B00JANV4K8/ref=sr_1_1?dchild=1&keywords=air+venturi+fill+station&qid=1583363112&sr=8-1
This one is not
https://www.pyramydair.com/s/a/Air_Venturi_100_cu_in_Carbon_Fiber_Tank/8955
Upvote 0
It is the one that is not regulated. Is it possible that the tank was not filled to 4500 psi??? When I got it filled this morning...it was very warm..indicating a fast fill..once it cooled down the pressure went down...does that sound plausible?
Upvote 0
Your tank gage is showing you whats in your gun. I believe. Not whats in your tank,unless they are now equil or close
Upvote 0
Is it possible that the tank was not filled to 4500 psi???
That would be my next guess since you have an unregulated fill. The warm might account for 100-200psi but not 1500-1600psi. Most places will only fill to 3K very few fill all the way to 4500psi
Upvote 0