Going to be picking up a new to me Omega compressor in 2 weeks. I have two SCBA tanks with Jubilee valves in them. What do I need to be able to fill these tanks?
Thanks
Chris
Thanks
Chris
Filling a SCBA tank
- Thread starter Tazhunter0
- Start date
Pictures would help! Probably need a CGA347 fitting for the tank but not sure. Not familiar with Jubilee valve.
Upvote 0
I would think the compressor would come with everything needed. If it doesn’t PM me I probably have everything you need.
Upvote 0
will do. I don’t pick it up from the guy til March 7 or 8 because of my work schedule. Suppose to be showed how everything works when I get it. Taking one of my tanks with me when I go.
Upvote 0
the Air Venturi HP Valve has a DIN 300, Jubilee Charging Valve that incorporates a patented device restricting the flow rate into the airgun. The air flow restrictor reduces the chance of overheating from filling too quickly. The valve also has an improved pressure release screw and a comfortable, rubberized hand wheel. This unit is rated for pressures up to 4500psi (300bar).
This was copied from the Air Venturi Jubilee description.
Note the change to a DIN300 thread and the working pressure UP TO 4500.
This was copied from the Air Venturi Jubilee description.
Note the change to a DIN300 thread and the working pressure UP TO 4500.
Upvote 0
Jubilee valve Din rather than CGA347 output/input fitting. Could install Din to Foster quick connect.
https://www.pyramydair.com/s/a/Air_Venturi_HP_Valve_With_Burst_Disc_7_8_UNF_4500_PSI/5809
https://www.pyramydair.com/s/a/Air_Venturi_HP_Valve_With_Burst_Disc_7_8_UNF_4500_PSI/5809
Upvote 0