Fill station for scba tank

[madeintheuk]

There are so many! 
I’m looking for a setup to use an scba tank to fill my soon to arrive first pcp. I have tanks available, I just need the setup to connect to it. Which one do you advise using? I look on eBay and Amazon, and there’s so many to choose from!! All similar in price!

 

[biohazardman]

I guess that depends on what tank you are connecting it to. You did not say 7/8-14 UNF, 5/8x18 UNF or M18x1.5 Nor did you say if you wanted something inexpensive

https://www.amazon.com/IORMAN-Paintball-Compressed-Pressure-Charging/dp/B081YRD4PH?ref_=s9_apbd_orecs_hd_bw_bEdaB&pf_rd_r=YBP5E1N0DPJBG2PXS21G&pf_rd_p=25e9f2e3-ffa0-5d71-a946-a45258cc7677&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=3488751



or something a bit better like this slow fill valve.

http://experthpa.com/cart/cart.php?m=product_detail&p=112

I have one of these they are excellent and one does not have to worry about an overfill so much because they fill nice and slow. You have the option of a two gauge unit as well so you know both what is in the tank and what you are putting into the gun at a glance.



Doubt you have the smallish paintball style tanks 5/8x18 UNF but this is what I use on them. It is also a very nice slow fill valve as well.

https://www.amazon.com/Ninja-EZ-PCP-Fill-Valve/dp/B084KJ59V2?ref_=s9_apbd_obs_hd_bw_bEdaB&pf_rd_r=NQ0V1182NX6BRKSHYFZJ&pf_rd_p=b3fbe69f-c53b-5861-83cf-32826ee82e3a&pf_rd_s=merchandised-search-10&pf_rd_t=BROWSE&pf_rd_i=3488751

 

[madeintheuk]

It says in the title. I’m using scba tanks. I will be using the valve that comes on the tanks standard (for fire Dept. Use) as that’s where i will be filling my tanks. I need the setup to screw into that factory valve to fill my pcp. Sorry for the confusion!

 

[Aimright]

I bought mine from AGN member jking who builds fill stations made from mostly high quality Nuvair components and sells them regularly on the classified here. I would suggest you PM him to see what he has available.

 

[Eaglebeak]

This is the type of thing you are looking for. This type doesn't need an O-ring to seal but needs to be tightened with a spanner. https://www.aliexpress.com/item/32873043416.html?spm=a2g0o.detail.1000014.9.735035b111GrbU&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.14976.158757.0&scm_id=1007.14976.158757.0&scm-url=1007.14976.158757.0&pvid=f6e1440d-9e13-4ac0-ba87-68b32521a224&_t=gps-idcDetailBottomMoreOtherSeller,scm-url:1007.14976.158757.0,pvid:f6e1440d-9e13-4ac0-ba87-68b32521a224,tpp_buckets:668%230%23131923%2319_668%23808%235965%23492_668%23888%233325%2313_4976%230%23158757%230_4976%232711%237538%23679_4976%233223%2310328%234_4976%233104%239652%231_4976%233141%239887%234_668%232846%238113%23645_668%232717%237559%2317_668%233164%239976%23606 Aimright's suggestion will be of better quality but cost a little more.

 

[Houli]

Make a phone call to Joe Brancato, he knows his stuff regarding high pressure air. High pressure air is not to be taken lightly, personally I will pay a little extra to know I am buying better/best quality, its cheap insurance and I sleep better. 

Good place to start: call Joe 

Air Tannks For Sale

(714)907-0067

 

 

[KatoKevin454]

Walmart.com.......

Take your pick, their all the same, CGA347, just prices are different.

I have 3, I like the hand tight ones.

https://www.walmart.com/search/?query=pcp%20fill%20station%206000psi

 

[Gerry52]

Try this one, has the Delrin washer (not orange rubber). Using mine for 2 years with zero problems. 

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F401568527106 Had to edit, out of stock. Don't spend over $100, no need. If you get one with "rubber" o-ring just make sure you have spare rings & it will be FINE! Get one off Ebay.