Fill probe??

[Antj]

What do you guys use to seal your fill probes? I put a Oring inside the probe and thread tape to seal but air still leaks out.

 

[Guest]

Where is it leaking? At the hose connection?

 

[JohnL57]

Put silicone Dive grease on the O-ring.

 

[Antj]

FastEddieWhere is it leaking? At the hose connection?

I'm getting a leak thru the probe and male fitting. Air is coming thru the thread tape.

 

[kk4iz]

if it is between the probes and the foster fitting there, it is a washer with a seal built into it. Look for a 1/8 Dowty washer

Warren

 

[Guest]

Or it has to be tightened a little more

 

[Yote]

Mine leaked in the same spot got lucky it wasn't tight enough 

 

[Antj]

Ok guys I will try the suggested methods. Thanks as always