I filled my pcp with a omega 4500 compressor and an alpha moisture filter. When I was done I released pressure from compressor and filter but my fill hose was still under pressure. It took me quite a while to shoot all the air out of my pcp. I've searched for some type of pressure release fill hose but haven't found one. Can anyone suggest a solution to this problem?
Fill hose
- Thread starter airsent
- Start date
I don't quite understand if the foster fitting is working , and you release the pressure there shouldn't be any pressure in any line.
If you have a problem could you not just de gas it.
If you have a problem could you not just de gas it.
Upvote 0
Does your Alpha filter have the upper bleed valve option? You need that bleeder past the PMV.
Upvote 0
The air release on compressor relieves pressure up to the filter and the filter air release only relieves pressure inside filter but not the fill hose. I do need a pressure release on fill hose but I haven't found one. The problem is I have no idea exactly what to search for on internet.
Upvote 0
Check the fittings on the fill hose, as some do have removable check valves in them (usually the male fitting).
Does the hose have a hard connection to the Alpha filter (As in no - quick disconnect)? If so, there could be one in there.
As others have said, pictures help greatly . . .
Does the hose have a hard connection to the Alpha filter (As in no - quick disconnect)? If so, there could be one in there.
As others have said, pictures help greatly . . .
Upvote 0