1. loaded/cocked chamber indicator
2. decocker/chamber deflator
2a. Pellet remove/unload
2. decocker/chamber deflator
2a. Pellet remove/unload
Features you’d like to see in a PCP
- Thread starter _walter_
- Start date
Great barrel - that can easily be swapped (including caliber swaps)
Great trigger - that can be dropped to 4-6 ounces
Low magazine height - so scope can be mounted very close to the barrel
External velocity adjustment(s)
Everything else I can customize to my needs / ergonomics.
Great trigger - that can be dropped to 4-6 ounces
Low magazine height - so scope can be mounted very close to the barrel
External velocity adjustment(s)
Everything else I can customize to my needs / ergonomics.
Upvote 0
Stout barrel & rigid barrel/receiver interface
Availability in a non-bullpup version
Adjustable buttpad
Adjustable comb
O-rings - low count & easy access to replace
Purpose built for a certain fpe range and/or projectile type
Availability in a non-bullpup version
Adjustable buttpad
Adjustable comb
O-rings - low count & easy access to replace
Purpose built for a certain fpe range and/or projectile type
Upvote 0
Definitely a high-throughput and high-precision/efficient solenoid valve that can work at high pressures of 200+ bar, and that parts of that valve can be changed for the needs of a certain caliber (such as Skout AG) and el.trigger
Upvote 0
Well, something as basic as an airbottle or airtube that has a valve so you can swap out bottles or airtubes in the field without degassing.
FX does it. Even Hatsan does it! Considering how expensive airtubes and bottles are, that valve should be standard.
Just my 2c.
Matthias
FX does it. Even Hatsan does it! Considering how expensive airtubes and bottles are, that valve should be standard.
Just my 2c.
Matthias
Upvote 0
Lol that used to dive me crazy when I 1st got into PCPs 15 years ago, Since I was a kid i was taught from day one never look down a barrel of a gun,With my PCPs I used to check my gauges with a mirror .
I give my RTI Prophets a 10 + for the side gauges. But that post made me laugh./
Mike
Upvote 0
Designed to be ambidextrous. Especially magazine placement so both right and left hand folks can achieve proper cheek weld.
Upvote 0
Keep it simple, The less O rings the better, Lite weight, Power. Adjustability , Back to simple easy to work on easy to change calibers .
I just want to think RTI for bringing out the Prophet, It hit all the bells.
Mike
I just want to think RTI for bringing out the Prophet, It hit all the bells.
Mike
If you design a PCP that can’t be filled to 4500psi and it cost +$1k please build a fill reg valve into the gun. I should be able to either tether, or fill and have the airflow automatically cut off at the precise design pressure without needing to buy something that sits between the gun and tank. Just a thought, it would be really nice to have…
Upvote 0
If...you're clever...you don't need...to...look down the barrel !
An ,off to the side view will put an errant pellet (that SHOULDN"T be loaded anyway !), or air blast, way off to the side of your head.
Hell, if I can do it...
Mike
Upvote 0
No breach o-ring (like RAW) or the very least mount it ON the probe and NOT inside the barrel.
Upvote 0
if i can see the gauge i can see the end of the barrel and i consider it loaded all the time loaded or not
Upvote 0
An indicator you can see from the shooting position that you just used the last shot in the mag.
Upvote 0
Would you explain what you mean (photo?) — and why that is good?
Pardon my ignorance....
Matthias
Upvote 0
How about light, compact, and powerful with good shot count and not look like a glorified potato gun?(I mean you FX!)
Upvote 0
Some time back, I started making a list of features I would like to see in a PCP and then I found the RTI Prophet Performance and bought it.
Upvote 0