Okay, I am selling my JKHAN Noblesse in .22 it was a hammer right out of the box, but I have installed a Huma Regulator and an RL Airguns reduced hammer spring which gives 55 consistent shots at around 860fps with the JSB 18.1 gr pellets on a single fill.
scope and mounts are NOT included.
you will get the fill probe fitting and two fully working 10 shot magazines
The stock shroud has been modified to include 2 X baffle sections as seen with the nylon washers and pink hair curlers cages wrapped in Orange felt. This alone is quieter than the stock shroud with Airstripper. The stock shroud end cap can be removed and the included JKHAN moderator adapter can be fitted to install the included modified JKHAN version, or one of your own. The original JKHAN moderator comes with just an Airstripper just like the shroud did. I removed this, and installed 3 baffled sections using larger hair curlers and felt. The result with this and the shroud combined is a super quiet gun. You hear the snap of the hammer hitting the valve and that is it.
The Noblesse is very consistent, accurate and quiet, but I am just not using it now that I have my .25 caliber Vulcan, so it needs to go. Wood is pristine and no scuffs or dings that I can see. It has approximately 400 pellets through it, and I'd like $600 shipped in US only. PayPal gift. It will come wrapped well in the original factory box. No trades, or low ball offers!
pictures are below:-
HuMa reg installed..
Shroud Baffles
Shroud muzzle end prior to fitting end cap.
MOD EDIT: This topic has been locked due to inactivity or since the ad is no longer necessary. Please contact a moderator if you would like it unlocked.
scope and mounts are NOT included.
you will get the fill probe fitting and two fully working 10 shot magazines
The stock shroud has been modified to include 2 X baffle sections as seen with the nylon washers and pink hair curlers cages wrapped in Orange felt. This alone is quieter than the stock shroud with Airstripper. The stock shroud end cap can be removed and the included JKHAN moderator adapter can be fitted to install the included modified JKHAN version, or one of your own. The original JKHAN moderator comes with just an Airstripper just like the shroud did. I removed this, and installed 3 baffled sections using larger hair curlers and felt. The result with this and the shroud combined is a super quiet gun. You hear the snap of the hammer hitting the valve and that is it.
The Noblesse is very consistent, accurate and quiet, but I am just not using it now that I have my .25 caliber Vulcan, so it needs to go. Wood is pristine and no scuffs or dings that I can see. It has approximately 400 pellets through it, and I'd like $600 shipped in US only. PayPal gift. It will come wrapped well in the original factory box. No trades, or low ball offers!
pictures are below:-
HuMa reg installed..
Shroud Baffles
Shroud muzzle end prior to fitting end cap.
MOD EDIT: This topic has been locked due to inactivity or since the ad is no longer necessary. Please contact a moderator if you would like it unlocked.