been looking for for this gun since i seen rick from the no fluff site demonstate it any info on a release date is appreciated
evanix rex b a where is it ////??
- Thread starter Hynzie
- Start date
My Friend just bought the Evanix Rex carbine, not the short pistol one, but the longer carbine model.
To be kind but honest I would never recommend anyone buying it, it is: 1 loud, very very loud. 2 terribly innacurate with all 5 types of pellets we tried, 3 it is not possible to mount a bi-pod. 4 It is hard to get pellets into the tray. and 4 it is not really cheap, a Marauder would be a much better option in my opinion, oh and 5 the trigger was absolutely HORRIBLE! I would guess it had a 15-16 pound trigger, no doubt the worst I have ever seen.
This is my honest opinion on the rex, sorry Evanix but that one was a mistake, one a scale of 1-10 I would give this gun a 2.
To be kind but honest I would never recommend anyone buying it, it is: 1 loud, very very loud. 2 terribly innacurate with all 5 types of pellets we tried, 3 it is not possible to mount a bi-pod. 4 It is hard to get pellets into the tray. and 4 it is not really cheap, a Marauder would be a much better option in my opinion, oh and 5 the trigger was absolutely HORRIBLE! I would guess it had a 15-16 pound trigger, no doubt the worst I have ever seen.
This is my honest opinion on the rex, sorry Evanix but that one was a mistake, one a scale of 1-10 I would give this gun a 2.
Upvote 0
thanks good to know i love this site its a information station honesty good or bad always wins out in my mind when i seen the vid he called it the one gun as in best but i know if he dumps on the guns they probably wont send them to him thanks again pat from boston
Upvote 0
Moehofer i agree with every point you make. The rex is the worst airgun that i bought. I am thrying so hard to like this gun because the concept is great. The gun broke 4 times in the half year that i have it.
It is possible to mount a bipod on the rifle version because the "shroud" is 30mm in diameter. This makes it posible to attach a picattiny mount that would normally be mountet on top of a scope.one of those mount that you could use to put a red dot on a scope.
,Niels
It is possible to mount a bipod on the rifle version because the "shroud" is 30mm in diameter. This makes it posible to attach a picattiny mount that would normally be mountet on top of a scope.one of those mount that you could use to put a red dot on a scope.
,Niels
Upvote 0
The part that fails was the the horrible trigger. The adjustment screw would vibrate loose. This would make the gun fire on ita own. I got the gun back from repair this weekend. I hope the trigger holds up this time but i doubt it.
the gun is resonably acurate with cast bullets tho. That and the looks are the only pros on this gun
the gun is resonably acurate with cast bullets tho. That and the looks are the only pros on this gun
Upvote 0
If I am remembering right the b a is not going to be imported by pyramid air or air ventrui . Not sure who if any one will be importing it .
My .357 rex rifle is decently accurate with poly-mags . I have not bought a bullet mold for it yet so I have not shot any cast bullets . I have heard that the lee 105gr swc is very accurate in the rex .357 . The trigger pull is absurdly heavy on full power, not near as bad on low . Mine seems to have a different trigger adjusting screw, the 0.89mm allen wrench that is supposed to fit the screw is too big . bought two and neither fit it . Never had any issue loading it there is plenty of room . At the very least it dose not leak like the Benjamin bulldog that I replaced it with and it is not made out of cheap plastic . It is also easy and quick to fill with a hand pump .
My .357 rex rifle is decently accurate with poly-mags . I have not bought a bullet mold for it yet so I have not shot any cast bullets . I have heard that the lee 105gr swc is very accurate in the rex .357 . The trigger pull is absurdly heavy on full power, not near as bad on low . Mine seems to have a different trigger adjusting screw, the 0.89mm allen wrench that is supposed to fit the screw is too big . bought two and neither fit it . Never had any issue loading it there is plenty of room . At the very least it dose not leak like the Benjamin bulldog that I replaced it with and it is not made out of cheap plastic . It is also easy and quick to fill with a hand pump .
Upvote 0