Edjun Eazy Fill question

I close mine when I’m done for the session because it seems like a common sense thing to do. But yes you can leave the tank valve open for a few hours while shooting if everything is snug, good O-rings and quality fittings.

Really like mine and gladly supporting Russians against the globalists.

I received my EaZy Fill with a white piece of delrin that seems to act as a sort of O-Ring when I screw on the long foster fitting I need for my gun. However, the EaZy Fill does not bleed off after use, so I still need to bleed the line. Sort of defeats the purchase. If I screw the foster fitting in without the aforementioned delrin piece the pressure bleeds out and almost none goes into the gun. So......anyone know what size o-ring I might need or is plumbers tape an option?

thanks. 
 
I close mine when I’m done for the session because it seems like a common sense thing to do. But yes you can leave the tank valve open for a few hours while shooting if everything is snug, good O-rings and quality fittings.

Really like mine and gladly supporting Russians against the globalists.

I received my EaZy Fill with a white piece of delrin that seems to act as a sort of O-Ring when I screw on the long foster fitting I need for my gun. However, the EaZy Fill does not bleed off after use, so I still need to bleed the line. Sort of defeats the purchase. If I screw the foster fitting in without the aforementioned delrin piece the pressure bleeds out and almost none goes into the gun. So......anyone know what size o-ring I might need or is plumbers tape an option?

thanks.

When I first assembled my EaZy Fill, I must have overtightened it, as the delrin piece got crushed -- the opening was too small to allow any air to pass to the gun. 

So I removed the delrin piece, and reassembled using teflon tape on the threads. Now it works perfectly -- and it does bleed the EaZy fill mechanism when you let your finger off the trigger. 

I wonder if your delrin piece is smashed like what happened to me?

The first time I tried the EaZy fill without the delrin piece it acted a little squirrely. After a few cycles of the trigger it was fine.

Tuning video: https://www.youtube.com/watch?v=PR_IH4dnzGM