Edgun

[Peskådot671]

Sometimes the obvious gets overlooked but did you retighten the bleed screw? You might need a quick blast of air from a scuba or SCBA tank. Is air coming out of the muzzle when you try and pump it?

 

[delooper]

I did. I tried every thing so far.

I did that and even purchased two brand new gauges and same thing for both. The tube isn’t taking in air. Seems like the air from the hose doesn’t go anywhere in the tube. Could be the fill prob orings but those look fine and were working fine before I changed the gauge.

When you try to fill it, where is the air coming out? You should be able to feel it, if it's quick, and hear it, if it's slow.

If the leak is really slow, you might need to submerse in water to find the leak.

 

[jwrabbit123]

edguns do not have issues if gun dont fill from probe did you change the oring? if so screw has to not bet tight or it wont fill , as far as a gage leak is oring proper diameter ??? I have owned every edgun but L2 and they just do not leak
message me if you got an issue and cant figure it out
LOU

 

[fatmatic]

edguns do not have issues if gun dont fill from probe did you change the oring? if so screw has to not bet tight or it wont fill , as far as a gage leak is oring proper diameter ??? I have owned every edgun but L2 and they just do not leak
message me if you got an issue and cant figure it out
LOU

The gun wasn’t leaking. I changed the gauge and now it won’t fill. When I air it up the air doesn’t go into the tube. I didn’t touch the screw inside so I am guessing it might be the fill probe and will change those orings.

 

[jwrabbit123]

i will pm you