DO NOT POST WANT AD OUTSIDE THE CLASSIFIED SECTION.
Classifieds Rules
www.airgunnation.com Read the Rules on Classified transaction. DO NOT POST WANT AD OUTSIDE CLASSIFIED SECTION.
Last edited by a moderator:
Edgun
- Thread starter Hagopk123
- Start date
www.airgunnation.com Read the Rules on Classified transaction. DO NOT POST WANT AD OUTSIDE CLASSIFIED SECTION.
What shambozzie said! DON'T try to skirt the rules here. It makes us leery of scammers. Don't be in a rush, you just might learn important stuff! Good luck.
Upvote 0
Yea, I am looking for ver.1 for some long time. Btw, how many L2's we have here? Was that just couple boxes @ AGS or a full skid?At present you can't get them new in Canada.
Upvote 0
No idea. AGS has a 2nd one on order for me. Well, I have everything except a 2nd front body, i.e. the part that holds the barrel and trigger.
Upvote 0
Yes, but given that this is the part deemed the "receiver", and I've never imported a firearm from the States before, that would be a major legal headache for me. AGS has a history of importing firearms, including this one, so might as well let them do it.
Upvote 0
I shouldn’t say leak. I changed out the gauge and now it won’t hold air. Tried two different wika gauges with o-rings and it just won’t take any air. I’m trying to fill it with a hand pump, idk if that has anything to do with it but air just won’t go into the tube
Upvote 0
Pull the gauge out, and inspect the surfaces, then also inspect the o-rings for damage. If the leak is from your gauge, that would be the most realistic source of the problem.
Upvote 0
I did. I tried every thing so far.
I did that and even purchased two brand new gauges and same thing for both. The tube isn’t taking in air. Seems like the air from the hose doesn’t go anywhere in the tube. Could be the fill prob orings but those look fine and were working fine before I changed the gauge.
Upvote 0
Fill probe o-rings can be damaged easily. Take them off, inspect, and replace if necessary.
Upvote 0