EDgun R5M/ Lelya repair and Maintenance
- Thread starter EDgunWest
- Start date
always great to watch your videos such a easy gun to work on way would you buy any thing else
Upvote 0
Another Great Video! Thanks! In a previous Lelya video I believe you mentioned that you would be putting up a new video showcasing the long range accuracy of the Lelya 2.0. I've looked but haven't seen it. If it is up would you please share the link?
Thanks,
Bob
Thanks,
Bob
Upvote 0
Great video and clear explanation of the components and process steps Brian. Keep them coming.
I want to add that the fill plug on the EDgun unscrews as easily as the valve housing. This allows one to push out the reg as opposed to using air. I have learned by working on other people’s guns that making assumptions is not safe. A new gun may need less than even 1 BAR to move the reg. Depending on the air quality an owner is using, it is not so predictable. I use air to move the reg on my guns just like Brian does. I would not attempt this on a gun if I am not sure of the quality of air it is being filled with. Instead I remove the fill plug and push the reg with a dowell. I have seen first hand a near miss that I never want to happen to anyone on our forum or in our community.
Stay safe folks.
Joe
I want to add that the fill plug on the EDgun unscrews as easily as the valve housing. This allows one to push out the reg as opposed to using air. I have learned by working on other people’s guns that making assumptions is not safe. A new gun may need less than even 1 BAR to move the reg. Depending on the air quality an owner is using, it is not so predictable. I use air to move the reg on my guns just like Brian does. I would not attempt this on a gun if I am not sure of the quality of air it is being filled with. Instead I remove the fill plug and push the reg with a dowell. I have seen first hand a near miss that I never want to happen to anyone on our forum or in our community.
Stay safe folks.
Joe
Upvote 0
