After fitting the huma reg and plenum, air leaks from the tiny breathing hole in the cylinder when I start filling
reg tester shows the reg is fine, but I still changed the seals on it
strange, as no leaking if I use the huma reg with the original edgun reg body as a plenum
this leaves me with no other thought, other than it’s an issue with the huma plenum. However, this is highly unlikely upon knowing huma quality and the fact the plenum is simply an empty tube
any help would be appreciated
reg tester shows the reg is fine, but I still changed the seals on it
strange, as no leaking if I use the huma reg with the original edgun reg body as a plenum
this leaves me with no other thought, other than it’s an issue with the huma plenum. However, this is highly unlikely upon knowing huma quality and the fact the plenum is simply an empty tube
any help would be appreciated