Borrowed from another forum
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Borrowed from another forum
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Hello thanks for the info, just to be sure, you talk in OD OR ID?
Thank you
Borrowed from another forum
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Hello thanks for the info, just to be sure, you talk in OD OR ID?
Thank you
ID X Cross Section Diameter
Thank you Jwilson