Edgun O Rings
- Thread starter DanCarey
- Start date
Borrowed from another forum 
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Upvote 0
G
Guest
Guest
Ed was kind enough to send me this when I asked him for R5 o-ring sizes. Also included springs, screws etc.
Owner/designer, half a world away, taking time to personally see that a customer has the product information he needs (well, "wants', since I don't yet need to replace any)... can't beat that with a stick.
Upvote 0
Thank you very much, I'm sure others will benefit from your knowledge also.How do I open Ed's doc?
Upvote 0
G
Guest
Guest
Should be able to download & open with Excel (or Google Sheets)... if it won't work for you, pm me your email address & I'll send it that way.
Upvote 0
Borrowed from another forum
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Hello thanks for the info, just to be sure, you talk in OD OR ID?
Thank you
Upvote 0
Borrowed from another forum
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Hello thanks for the info, just to be sure, you talk in OD OR ID?
Thank you
ID X Cross Section Diameter
Upvote 0
Borrowed from another forum
R3M o-rings list:
• Ф 2,57 х 1,78 - 1 pcs (front plug filling valve)
• Ф 5.1 х 1.6/6 x 1.6 - 1 pcs (pellet probe for .22/.25)
• Ф 5 х 1.5 - 5 pcs (front of the regulator shaft - 1, inside the regulator - 1, seal between the tank and bolt assembly on .22 only -1, filling probe - 2)
• Ф 8 х 1.5 - 1 pcs (rear of the regulator shaft)
• Ф 19 х 2 - 1 pcs (permanent compensator seal)
• Ф 25 х 3 - 4 pcs (front and rear plugs, regulator)
• Ф 22 х 1.5 - 4 pcs (2 multishot clips)
• Ф 5 х 2.5 - 1 pcs (pressure gage)
Hello thanks for the info, just to be sure, you talk in OD OR ID?
Thank you
ID X Cross Section Diameter
Thank you Jwilson
Upvote 0