EDgun Edgun Leshiy 2

[donut_man]

I dig my Leshiy one critique I have is the lever that allows the gun to break down also renders the last bit of the pic rail unusable If you want to use that portion of the mount and the break down lever.
there, that’s my complaint on the internet for the day.

 

[bigHUN]

... the lever that allows the gun to break down also renders the last bit of the pic rail unusable ...

There are workarounds,
either you find a lever style scope mount, there are again several designs ... ?
or, the quickest and least expensive is - take a file and chop down that corner on the scope ring. Eventually you can hide the aluminum shine with a black marker
or, get a IO scope of your choice...

 

[donut_man]

I normally don’t mind adjusting/tinkering things like that but for the price of this one it’s left stock. The factory lever should be corrected imo, maybe already was. I have a romeo4 on it at the moment.

 

[Peete]

I normally don’t mind adjusting/tinkering things like that but for the price of this one it’s left stock. The factory lever should be corrected imo, maybe already was. I have a romeo4 on it at the moment.

I did adjust the handle a little to be able to get the pica mount all the way back on the rail.

 

[donut_man]

Im glad i’m not alone i found myself wanting those bits of the rail to get the scope close enough to my face.

 

[bigHUN]

The biggest issue may be the Length of Pull. If it is way over long you never get the eye box right without creek in a neck
There are LOP tubes available in different length if that helps.

 

[bigHUN]

Kind of boring day, browsing some random things on the internet.
And suddenly I hear some hissing noise from downstairs/basement locker.
My Leshiy2 gauge adapter oring decided to puffff and leaking out the juice big time. And I just top it up yesterday to some 280 bars. What a waste ....
No problemo, I have full bags of L2 orings from oringsandmore, and this is a great opportunity to replace the Edmu gauge battery as well. Or maybe I put an analogue back there and re-use this digital at some more important place.
Whatta day.
Finally something to do

 

[NeutronFluxLabs]

Hey, new to a .30 cal 350mm, came to me with 0.3 jets, SS ball #14. has anyone played with and settled on a good jet combo for that for decent pesting power but not such a sharp report? (mainly from the translator/magazine action). It's got a reflex behemoth I plan on adding two more baffles to, (has the standard set). I failed to get FPS numbers but put the tail end from a .25 that had one large unmarked jet and a blanking plug and with the same optic/zero on the .30 cal. The same ammo held zero and groups but it was much quieter. it was the REPR regulator in the .25 vs the REPR-X in the .30, wondering if anyone has any intel on why that made a difference in my exp.

 

[Sergey1972]

Hey, new to a .30 cal 350mm, came to me with 0.3 jets, SS ball #14. has anyone played with and settled on a good jet combo for that for decent pesting power but not such a sharp report? (mainly from the translator/magazine action). It's got a reflex behemoth I plan on adding two more baffles to, (has the standard set). I failed to get FPS numbers but put the tail end from a .25 that had one large unmarked jet and a blanking plug and with the same optic/zero on the .30 cal. The same ammo held zero and groups but it was much quieter. it was the REPR regulator in the .25 vs the REPR-X in the .30, wondering if anyone has any intel on why that made a difference in my exp.

Large Jet is faster CLOSING. Higher pressure and faster closing yields quieter shot and less wasted air. You didn't say at what distance you had the same zero. Big velocity difference may not be apparent on the target at some shorter distances.