EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
I've scanned the forums... and haven't found where this has been discussed. I apologize in advance because I'm sure I must have missed it.
I'm really wanting to increase my L2's air capacity beyond the standard upgraded tank. I saw (below) that I can order 3 larger tank sizes from the UK but for them to work I assume I'll need to increase the length of my stock plenum. My plan was to swap out the stock plenum for the longest compatible plenum I can find then max out my tank size based on how much room the new setup gives me for a larger air tank.
Will this work or am I missing something? Any idea where I can purchase a compatible larger plenum? Larger tanks?
Any advice, insight or sources would be appreciated. I pretty much got nothing. Thanks in advance guys.
https://www.bestfittings.co.uk/product-category/fill-probes-adaptors/buddy-bottles-valves/ )
I'm really wanting to increase my L2's air capacity beyond the standard upgraded tank. I saw (below) that I can order 3 larger tank sizes from the UK but for them to work I assume I'll need to increase the length of my stock plenum. My plan was to swap out the stock plenum for the longest compatible plenum I can find then max out my tank size based on how much room the new setup gives me for a larger air tank.
Will this work or am I missing something? Any idea where I can purchase a compatible larger plenum? Larger tanks?
Any advice, insight or sources would be appreciated. I pretty much got nothing. Thanks in advance guys.
https://www.bestfittings.co.uk/product-category/fill-probes-adaptors/buddy-bottles-valves/ )
Upvote 0
I think some people have gotten 480cc to fit with extended plenum and REPR reg perhaps. I think hobbyman posted his in this thread a couple days ago.
Upvote 0
Correct. Francisco has both a longer and a shorter plenum on his site. He also says that the REPR requires the shorter plenum to maintain the same Length of Pull (LOP). With the standard plenum and the REPR one has a longer LOP..
Upvote 0
4 mm hole in the Delrin donut makes the L2 speed more consistent and quieter, and works better than a Teflon (PTFE) donut
L2 mag with a paint circle prevents from blank shots:
L2 mag with a paint circle prevents from blank shots:
Upvote 0
Depending on caliber and power I would guess, but if anyone want to test this steel plates for the .177 comes with 4 mm holes
Upvote 0
Towle
WcJake423 is shooting .22 350mm in the 25ft/lb range. He's been doing some interesting tuning experiments.
WcJake423 is shooting .22 350mm in the 25ft/lb range. He's been doing some interesting tuning experiments.
Upvote 0
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Upvote 0
Upvote 0
Is there a trick to contacting Francisco / Spain Edguns?
Ive emailed him a few times now about the specs on his longer plenum(s), no reply yet.
Ive emailed him a few times now about the specs on his longer plenum(s), no reply yet.
Upvote 0
Does this provide the specs you’re looking for?
https://www.edgunleshiy.shop/collections/plenums-leshiy-2/products/plenum?variant=39799206379670
Upvote 0
That’s a good thing. 170+ pages, for a thread meant to introduce the EGL 2, is a bit excessive!
By now everyone should be starting their own thread, when they have a specific EGL 2 subject to discuss.
Everyone posting new questions, on this thread, make it very difficult to utilize the search tool for EGL 2. You just end up scrolling through 170+ pages, trying to find your inquiry.
Upvote 0
One question, what is the size in mm, the full lenth in the PUCK · TRANSFER, 25 cal, someone has tried the puks madre in Nylon (Acetal), that is selling in Ebay uk...worth the pity?Many Thanks.
Upvote 0
I think Edgun could make the nylon puck as well but they made it from silicon...wondering must be some reason...
Upvote 0
First nylon is not acetal. Delrin is one of the forms of acetal. Delrin is hard enough not to scratch easily but soft enough to seal at high pressure. Wjcake423 made the pucks from teflon and they scrached easily. The delrin worked well and he made some experiments with different hole sizes. It seems the smaller size hole sealed better and didn't let the firing air expand as much in the puck raising velocity. Which he posted earlier. He did polish the breech face to make the puck seal better and it quieted the gun.
Upvote 0
Got the email from EGW today, REPR plenum is in stock. They also have in stock, the compact reservoir that keeps the stock LOP the same.
Upvote 0