EDgun Edgun Leshiy 2

[Leatherman]

Another question...

My QD sling doesnt fit in the gun... the male is narrower thant the butt hole so the balls doesnt retain the gun to the slrap. if i hang the gun hands free it will drop.



WHat king of sling are you using on your L2??? thanks

LOL - best post of this entire long ass thread!

Was that a bad translation or creative writing. Lol

xDDDD sorry for my english, guys. English is not my first language. Besides, i was typing with the phone...hahahah

i cant post a real picture right now, but this is what i mean:

the male conection of the QD sling doesnt keeps in place inside the gun once installed... because the hole is much wider than the insert





i also use the magPul swivel which fits the ED Gun Leshiy’s butt hole(. I have bought some other brands off Amazon which are too small. I have learned to read the reviews on tactile gear that is supposed to fit standard mil spec . The cheap knock offs sometimes do not. Some reviews state that although the swivel seemed to attach in the stock mount, it pulled out in use. I would hate to have this happen and drop my gun on the ground. Would make for a bad day.

 

[Leatherman]

I am getting 866 FPS useing 50 grn JSB , 350mm barrel, reg set at 165 bar. 1 .2 jet , second jet plugged . The 50 grain groups better than the 45 so I am sticking with this. I don’t see a need for slugs in .30 caliber for what I use it for. I get 3 magazines out of full 300 bar fill on my 300 bottle. It has taken 4 groundhogs this summer off my property. Switching to .22 250mm barrel soon for PA small game season. Just ordered ASV 20 grn slugs to try. Hope the new regulators come soon.

If you are used to the 350mm barrel length take a .22 350mm barrel for more efficiency ,you can run it at lower reg pressuren at the same speed and get better fps for slugs

I run at aprox 106 bar reg pressure and get 100 shots 2x .8 jets 16gr jsb at 270m/s with a 350cc bottle 

groups very good at 50m and i can get 10 cm groups at 100m at this setting 



I agree with you. I bought the gun in .22 with the 250mm barrel . Of course we all bought our Leshiy 2 guns sight unseen and also with very little performance specs . I bought a .30 barrel in 350mm and now have settled on how I want to run my gun with the carbon fiber hand guard and Huma Mod 30 . I like the look and length of the 350mm barrel . My 250mm barrel will still fit in the Carbon Fiber hand guard and with the M30 Moderator it is only about 5 inches shorter. I wish now I had got the .22 in 350mm for more velocity and a little better efficiency as you said.

 

[Larcat]

Anyone have a rail extension they like that extends the bottom picatinny for mounting a bipod further forward?

 

[Glem.Chally]

Anyone have a rail extension they like that extends the bottom picatinny for mounting a bipod further forward?

Maybe something like this? (Canadian price)

 

[Jack.K]

Anyone have a rail extension they like that extends the bottom picatinny for mounting a bipod further forward?

I’m using a Yankee Hill Machine Rail Extension, 6" (YHM-9473) along with a picatinny to ARCA adapter. Here is a pic and link. 

Yankee Hill Machine Rail Extension, 6" (YHM-9473) https://www.amazon.com/dp/B07RQ17RDK/ref=cm_sw_r_cp_api_glt_fabc_W6MJ0TBNZWB5ZJHC249D

 

[jamoalla]

Another question...

My QD sling doesnt fit in the gun... the male is narrower thant the butt hole so the balls doesnt retain the gun to the slrap. if i hang the gun hands free it will drop.



WHat king of sling are you using on your L2??? thanks

LOL - best post of this entire long ass thread!

Was that a bad translation or creative writing. Lol

xDDDD sorry for my english, guys. English is not my first language. Besides, i was typing with the phone...hahahah

i cant post a real picture right now, but this is what i mean:

the male conection of the QD sling doesnt keeps in place inside the gun once installed... because the hole is much wider than the insert





i also use the magPul swivel which fits the ED Gun Leshiy’s butt hole(. I have bought some other brands off Amazon which are too small. I have learned to read the reviews on tactile gear that is supposed to fit standard mil spec . The cheap knock offs sometimes do not. Some reviews state that although the swivel seemed to attach in the stock mount, it pulled out in use. I would hate to have this happen and drop my gun on the ground. Would make for a bad day.

Maybe thats my problem....my swivel is not an original magPul. Definitely i dont want my leshiy2 to drop.



thanks mates for your replies

 

[Deepbass9]

Doesn't have to be Magpul...just milspec...

 

[Larcat]

Anyone have a rail extension they like that extends the bottom picatinny for mounting a bipod further forward?

I’m using a Yankee Hill Machine Rail Extension, 6" (YHM-9473) along with a picatinny to ARCA adapter. Here is a pic and link. 

Yankee Hill Machine Rail Extension, 6" (YHM-9473) https://www.amazon.com/dp/B07RQ17RDK/ref=cm_sw_r_cp_api_glt_fabc_W6MJ0TBNZWB5ZJHC249D

Thanks -- Happy enough with it? Stiff enough to use the very end to mount a bipod?

 

[Jack.K]

Anyone have a rail extension they like that extends the bottom picatinny for mounting a bipod further forward?

I’m using a Yankee Hill Machine Rail Extension, 6" (YHM-9473) along with a picatinny to ARCA adapter. Here is a pic and link. 

Yankee Hill Machine Rail Extension, 6" (YHM-9473) https://www.amazon.com/dp/B07RQ17RDK/ref=cm_sw_r_cp_api_glt_fabc_W6MJ0TBNZWB5ZJHC249D

Thanks -- Happy enough with it? Stiff enough to use the very end to mount a bipod?

The Yankee Hill Machine Rail extension is a very solid extension. I’m using the M-Lok bipod cause it allows me to fold the L2 with the bipod attached. 
I’m also using the same YHM rail on my Delta Wolf with an Accu-Tac bipod as shown here.

edit. Typo

 

[Larcat]

Anyone have a rail extension they like that extends the bottom picatinny for mounting a bipod further forward?

I’m using a Yankee Hill Machine Rail Extension, 6" (YHM-9473) along with a picatinny to ARCA adapter. Here is a pic and link. 

Yankee Hill Machine Rail Extension, 6" (YHM-9473) https://www.amazon.com/dp/B07RQ17RDK/ref=cm_sw_r_cp_api_glt_fabc_W6MJ0TBNZWB5ZJHC249D

Thanks -- Happy enough with it? Stiff enough to use the very end to mount a bipod?

The Yankee Hill Machine Rail extension is a very solid extension. I’m using the M-Lok bipod cause it allows my yo fold the L2 with the bipod attached. 
I’m also using the same YHM rail on my Delta Wolf with an Accu-Tac bipod as shown here.

Thanks much, appreciate it

 

[armored007]

Got a Magpul QD Sling Swivel and it fits perfectly like my ARs

 

[scopecreep...]

Troy swivels work well on our three Leshiy 2s. I wish the stock's socket had 90⁰ detents. Eduard, if you're listening, perhaps a retrofit like the three REPRs for our recently received Leshiy's!!!? You've got three sales in the bucket from the get go. Another Cha-ching $.

 

[Traxx]

Got my .35l bottle today. I’ll get some shot strings tomorrow. 

 

[Kiteboardkid]

post deleted see next below with graphs

 

[Kiteboardkid]

Some data for you guys, dependance of the speed of the pellet from the presssure.

Hello Ed,



What is the setup difference between the first two graphs you show? Clearly at 130 bar pressure the first shows 748fps and the second show 804fps both are .22 and using JSB heavy 1.175g with insert installed in front plug. The first graph states 250mm barrel so does the second graph use a 350mm barrel?



Thanks.

 

[EDgun]

Yes, the second graph is for 350 mm barrel.

 

[Kiteboardkid]

Thanks for clarifying Ed. GREAT GUN SIR!!

I have the new E.A.R. and the new forward plug (with new inserts) for my Leishy 2, I have both .177 and .22 350mm barrels.

Was the new forward plug designed for the Sub 12ft-lb UK market or was it designed just to be used with the smaller calibres .177, .20, .22 ? Would you still recommend using the new forward plug with the inserts and 2x 1.2mm jets when running at 34ft-lbs (.22 920fps JSB heavy) ?



Thank you.

 

[Kiteboardkid]

I assume there is no point in using a puck with a larger hole than 5.0mm for .22 and 4.0mm for .177 due to the hole size in the magazine plate ?



I'm getting average 870 fps with the EAR (REPR) set to 130 bar pressure (measured with digital gauge attached), 5mm puck, 2x 1.2 jets, new forward plug with inserts. 350mm .22 barrel using JSB Exact Heavy 18.13gr (1.175g).



Thats over 65fps more than your graph shows Ed. NICE!!!

 

[shortfuse]

How come nobody has come up wit a 3D magazine for the L2 if someone has tinkered with this I could use 30 calibers

 

[Kiteboardkid]

Assume you mean .30 cal (7.62mm) ? This is already available.