Looking for an air tank on my L2, any experience with this one or other alternatives?
EDgun Leshiy 2 Air tank - 300 bar carbon fiber, worth the cost? $300
- Thread starter armored007
- Start date
Are you looking at the one at EdGun West or EdgunLeshiy.shop. Nothing wrong with either of them - or you can use any CF bottle with M18x1.5 threads.
Don't get a 480cc bottle as it will restrict you wrist at the grip.
You could also use this 220cc bottle at a significant cost savings: https://www.ebay.com/itm/363466033910. I used this one for a few months before Brian and Francisco had theirs available.
Don't get a 480cc bottle as it will restrict you wrist at the grip.
You could also use this 220cc bottle at a significant cost savings: https://www.ebay.com/itm/363466033910. I used this one for a few months before Brian and Francisco had theirs available.
Upvote 0
I have the 350 cc Edgun bottle my gun very compact no problem depends on what grip you have on to my gun the smallest it could go i love it Ground Hog 
Upvote 0
I have the acecare 350cc, less than half the price. Depending on your hand size this works well, it's 235mm long. Works great for me, that's black heat shrink if you're wondering.
Upvote 0
@Gelm.Chally - I like your L2 setup - very tacticool! You don't find the tank gets in the way of your hand? I've got large hands so it was an issue for me.
You don't find the tank gets in the way of your hand? I've got large hands so it was an issue for me.Upvote 0
@Gelm.Chally - I like your L2 setup - very tacticool!
Not really the bottle touches my wrist but I don't find it uncomfortable. If I had big mitts I'd have to use something else.
Upvote 0
@Gelm.Chally - I like your L2 setup - very tacticool!
Not really the bottle touches my wrist but I don't find it uncomfortable. If I had big mitts I'd have to use something else.
if you fit a grip like this or same angle it will give you a tad more grip room
Upvote 0
Yes. Have the edgun 350 cc. 300 bar down to 175bar 12 magazines. .22 350barrel shooting hn 15g pellets at 270ms.
Upvote 0
Glem.Chally
I don't know reg pressure or jet size, I do have the REPR. Haven't taken it apart yet which strange for me because I take everything apart whether it needs or not. I told Brian I wanted to shoot hades and the gun showed up setup. Haven't so much as adjusted the reg. I did get the bottle from Spain because it was a little bigger. Without it I was getting 3 or 4 mags down to 200. My buddy just bought the NON repr version from Artnav3 and he gets way more shots at the same velocity from, 6 I think. He did lower the reg from where Artie had it. Artie was shooting 21g HN pellets, if I remember correctly. We don't know what jets he has but we do think they were changed because Artie sent him 2 jets with it and the gun was originally a REPR.
My understanding is that REPR version has a smaller plenum and runs higher pressure. His blows a lot more air at the shooter. I read somewhere here that lower pressure causes more noise and air at the magazine and that's what he has. We thought it was because the barrel wasn't far enough back so we swapped the back ends (complete stock/valve assembly) and his gun quieted down immediately.
I don't know reg pressure or jet size, I do have the REPR. Haven't taken it apart yet which strange for me because I take everything apart whether it needs or not. I told Brian I wanted to shoot hades and the gun showed up setup. Haven't so much as adjusted the reg. I did get the bottle from Spain because it was a little bigger. Without it I was getting 3 or 4 mags down to 200. My buddy just bought the NON repr version from Artnav3 and he gets way more shots at the same velocity from, 6 I think. He did lower the reg from where Artie had it. Artie was shooting 21g HN pellets, if I remember correctly. We don't know what jets he has but we do think they were changed because Artie sent him 2 jets with it and the gun was originally a REPR.
My understanding is that REPR version has a smaller plenum and runs higher pressure. His blows a lot more air at the shooter. I read somewhere here that lower pressure causes more noise and air at the magazine and that's what he has. We thought it was because the barrel wasn't far enough back so we swapped the back ends (complete stock/valve assembly) and his gun quieted down immediately.
Upvote 0
Shoulder stock with forward plug/firing mechanism.
Butt Leshiy 2 - LSA242000
This Butt includes all the upgrades to date. Tool and adapter included! Having an extra butt for your Leshiy 2 not only means that you’ll always have a backup at hand, but also that if you take it with you during your shooting sessions, you can keep the fun going on well after emptying the...
www.edgunleshiy.shop Upvote 0