I shoot mine often. Its great for around the house pesting. I have had an issue with valves breaking every now and then. I do have the reg bumped up just a bit at 125 bar. Though I dont think that little jump in reg pressure would be the cause. What I had found was that the air from the main chamber was leaking past the o-rings to the regulated side. I pulled the reg out and simply re-lubed it and it has been fine so far. Not sure if others have experienced this but you might want to pick up a an extra valve or two... or 3. They are rather cheep and very easy to replace. Nice to have on hand if you run into this. I know if this happens again any time soon I may drop the pressure back down. The only other issue I have had was the mag switch coming loose and causing some issues with the feed. Just put some blue thread locker on the screw and it has been fine.
Upvote 0
