Ebay PCP Fill Station

[Bajahunter]

Hello Airgunners!

I recently bought this Fill Station for my Carbon fiber tank, and I was wondering if you have tried these before, if so, what was your experience with them?

 

[Tomiboy]

Mine works fine....$40

 

[starlingassn]

i have been using mine for a while now,works well.

i may add a microbore hose to mine eventually,

but i have no complaints so far.

 

[kkarmical]

I've been using one for awhile now, no complaints whatsoever.

 

[n2stuff]

Mine gets used 8-10 times a weekend for the last 6 months and has never been a problem.

 

[Skip-in-WV]

Mine works fine. I used a male-to-male adaptor and made a longer hose. Make sure you get the correct fitting for your tank. They make several.

 

[Glem.Chally]

Been using mine 1.5 years, the liquid in the gauge has pissed out slowly but has had no effect. 40$ shipped from China is tough to beat, can always upgrade the hose down the road to a longer nicer one.

 

[Oreida05]

i would be interesed in purchasing one

can you send me a link?

 

[Quad82]

Been using one as a backup or about a year. Had to sacrafic a pair of Vicegrips to lock on to the purge valve knob. If I don’t crank it down tight, it leaks air. Not an issue filling a rifle. But really waist air when filling the tank from the compressor. I have looked for replacement valves. But I can buy a whole new setup for the price of a valve. But for $40, works pretty good. 

 

[lenweber2]

Got two in the last 1/2 year. One with and one without the O ring on the 347 connection. Both work as advertised and agree with gun gauges. $40 or so from EBay.