Eagle Vision Mount & Casio Camera

Jump to latest Follow Reply
FredSG

FredSG

Member
Jul 22, 2015
109
6
Maine
Hello All,

I finally got around to super gluing my Eagle Vision Ring to the front of my Casio EX-ZR1300 Camera. I was concerned that if I was too sloppy with the super glue I would lock up the Casio Function Ring, which I didn't want to do. Several AirGun Nation members suggested I get a CA Medium super glue, which I did. I applied the super glue to the outside inner edge of the Eagle Vision Ring, the edge that comes in contact with the knurled ring. 

The Eagle Vision Ring is attached, and I can still rotate the Casio Function Ring as needed.





Just thought I'd post my experience mounting the Eagle Vision Ring onto the Casio Function Ring, which had been my concern before finding this forum and getting answers to my questions.

FredSG

 
Hi pulps,

The Function Ring allows you to control certain camera functions. You can program what the Function Ring can do by setting the menu options. When I glued the Eagle Vision ring to the Casio Function Ring, I carefully glued the Eagle Vision ring to the outside edge of the Function Ring, so it (the Function Ring) will still rotate and allow me to use it to work different settings. In effect, the Eagle Vision Ring and the Function Ring have now become one (ring).

FredSG
 
Upvote 0
Hi everyone. Do any of you have the eagle vision mounted to a Zero eye relief scope?

I have the MTC Viper Connect which has Zero Eye Relief. As I understand the scope cam set up used by everyone is on scopes with 2 to 3 inches of eye relief and the design of the eagle vision also seems to be built for eye relief scopes .

Will this work on a Zero relief scope? 
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu