Does anyone know if the Eagle Vision can securely attach to a scope that does not have a threaded eyepiece? I have a BSA Tatical Mil-Mil 4-14 x 44 mm Scope, but it does not have a threaded eyepiece.
This evening I was able to get the middle size tube on the focus ring of the eyepiece of the 4-14x44 far enough to stabilize it. Since I have the Zr1000 camera, the front ring turns and I glued the adapter so as not to bind up the ring with glue where it would not turn. I was able to install the tight fitting tube on the scope, then screw the camera onto the mount by rotating the glued on adapter ring threading it to the tube. it worked pretty well. I will try to do some shooting with it this weekend. The fit up actually looks pretty nice once in place. And the cross hairs are dead center in the view finder once zoomed in.