Dreampup leak

[Ed24]

I just installed a reseal kit in my dreampup. I have a leak coming from the small hole just below the pressure gauge at the end of the tube. See pick. Is this due to the seal for the gauge? When I fill the gun as soon as it gets above 150bar it starts leaking until it gets back around 150bar than stops??? Anyone have any info on this issue? ThxView attachment 20220619_121130.jpg

 

[rappert]

If you have already tried tightening the gauge a little more and it's still leaking you might try flipping the little gauge seal washer over in the other direction if you can get it out without damaging it. If it does not seal I am sure FX USA will have one. Good luck.

 

[Ed24]

Thx for the input. I did flip it before I posted so Ill call FX in the morning to see if I can get a few of those seals.