Dreamline barrel Question

[Hoople]

I have a .22 Dream lite with standard 500mm barrel. I would like to convert it to a 600mm barrel. I would also like a .25 conversion.

My question is can you use .22 600mm liners and the.22 components in the .25 600mm shroud (barrel housing)? It would be a big $ savings if you can. Thanks.

 

[edosan]

Nop

 

[LTU-013]

https://www.youtube.com/watch?v=D2AvRTUuTKc

 

[biohazardman]

To change liner calibers with the same length barrel you will need these two parts which from what I have heard FX will not sell to us. But I did find them here. You will need to apply heat to remove the barrel attachment as it is installed with locktight.



https://spares.bagnallandkirkwood.co.uk/product/part-2-fx-x-barrel-attachment-connector/

https://spares.bagnallandkirkwood.co.uk/product/part-5-fx-x-barrel-liner-lock/

 

[biohazardman]

Nop

I found these two parts a couple of months back.

https://spares.bagnallandkirkwood.co.uk/product/part-2-fx-x-barrel-attachment-connector/

https://spares.bagnallandkirkwood.co.uk/product/part-5-fx-x-barrel-liner-lock/

 

[edosan]

The only thing you can use is the liner sleeve, you need all the rest, that included, + the brass port. I meant nop out of the box. And you can not use the .22 barrel components in the .25 barrel (but the sleeve)

With the right skills you can do whatever you want

 

[Hoople]

Thanks all for your input.