Drager Scba tank

[Phildog59]

Does the Drager and Scott Scba tank’s take the same CGA-347 

 

[wastedgunner]

My Drager has CGA-247. Both brands come with a variety of valves. Thread size of cylinder might be same.

 

[Gerry52]

Picture please. Most use CGA347 but there are different valves used too so picture is necessary. 

 

[Phildog59]

Don’t have one yet. I’m looking at one but don’t know much if I get it I will post pictures thanks.

 

[Gerry52]

Not to confuse the issue but some tanks have a shorter threaded nipple (CGA346). CGA347 adapter WILL work on a CGA346 nipple but a CGA346 adapter will NOT work on a 347 nipple. Just sayin

 

[Grassguy12200]

I have 2 Scott’s two Draeger a MSA. They all have 347 fittings. I also have a Acecare but it’s DIN.

 

[Quad82]

I have a couple Draggers and 3 Scotts. The cga347 male threads are the same length on each of them. At least mine. But some fill stations use longer and shorter cga347 shaft. so some dont tighten well enough and leak under pressure.