Dovetail to picatinny adapter/rail

[tempo47]

Anyone know of some good 11mm dovatil to picatinny rail solutions for the airforce texan? My scope sits extremely low and i need to find a way to fix it ideal going picatinny since i have tons of rings that fit that over 11mm dovetail

 

[AirNGasman]

Coming from the polar opposite preferences of your's, and having two Brocock Bantams that came with (excellent) both options but not knowing it they are 11 mm, think I have what you seek. PM me if interested,

 

[2L8]

This is very nice and sturdy.

https://smile.amazon.com/gp/product/B07M5Q69PS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1



Patrick

 

[AirNGasman]

"This is very nice and sturdy."

Unfortunately according to your link, also "Currently unavailable."

 

[biohazardman]

I think quite a few of us use these adapters they seem to werq well.

https://www.pyramydair.com/product/utg-11mm-3-8-dovetail-to-weaver-adapter-2pcs?a=4148

https://www.pyramydair.com/search-results-ext?keyword=dovetail+to+weaver

 

[AntwuanMaxx]

Anyone know of some good 11mm dovatil to picatinny rail solutions for the airforce texan? My scope sits extremely low and i need to find a way to fix it ideal going picatinny since i have tons of rings that fit that over 11mm dovetail

https://www.bkltech.com/Dovetail-to-Weaver-Picatinny-Adaptor-Mounts-s/7.htm

 

[elh0102]

The BKL adapter is good, but might add too much height. JP Products makes one that slides on the dovetail and adds virtually no height. 

 

[Scotty1]

I had a UTG dovetail to picatinny adaptor with 20 moa built in. I gave it to another member, but got it from Pyramyd I believe. 

 

[SqrlHntr]

The insert style works well enough for me, and doesn't raise a mount or 20moa rail enough to notice much. Ive bough some chineseium brands off Amazon as well as utg and they are all basically identical. One makes different lengths is really nice to have. Not to be mix and matched, all are not the same, the utg’s are also slightly different batch to batch. Best to keep as a set. 

 

[elh0102]

Can't remember the brand, but I once ordered a set that I thought were 11mm, but they were 3/8", so the labeling needs to be precise. My favorite is the JP. It's made of delrin, so it won't scratch the dovetail, and tightened to spec, I've never had one move.

 

[2L8]

Here is a low profile combo that is available Sorry about the last link, it was in my past orders from earlier this year.

https://amazon.com/dp/B095Y1R8CM/ref=sspa_dk_detail_9?psc=1&pd_rd_i=B095Y1R8CM&pd_rd_w=vak6N&pf_rd_p=887084a2-5c34-4113-a4f8-b7947847c308&pd_rd_wg=4NHaR&pf_rd_r=5XHR9PHTCP47VJF4H7VN&pd_rd_r=d38a2477-6e81-425e-875d-0c3813ae4286&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExU1Y1U0hWNEFZNVgmZW5jcnlwdGVkSWQ9QTA2MTk0MjgyVlgzSEJWSURXMlEwJmVuY3J5cHRlZEFkSWQ9QTA1MTgxMTJBT1BBSTVWVkJBWjkmd2lkZ2V0TmFtZT1zcF9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

Patrick

 

[Mike.H]

UTG .22/Airgun to Picatinny/Weaver Low Pro Snap-in Adaptor , Black, I got mine from Amazon,



Hope this helps

 

[elh0102]

This is the JP adapter, top and bottom, and on a rifle. 

 

[Shootersbench]

The Weihrauch, HW100 comes with one, I'm not sure if you could find one that an owner did not use, but it is about an 8" rail that slides over the 11mm and then set screws lock it into place, very minimal rise as well. 

 

[elh0102]

The Weihrauch, HW100 comes with one, I'm not sure if you could find one that an owner did not use, but it is about an 8" rail that slides over the 11mm and then set screws lock it into place, very minimal rise as well.

I've had 3 HW100 rifles, and none came with this accessory.

 

[Shootersbench]

The Weihrauch, HW100 comes with one, I'm not sure if you could find one that an owner did not use, but it is about an 8" rail that slides over the 11mm and then set screws lock it into place, very minimal rise as well.

I've had 3 HW100 rifles, and none came with this accessory.

It's a new accessory, that they are now including in the box along with a drop stem for the side lever, I will dig one out and post a picture. I only noticed them this year in the boxes. 

 

[Shootersbench]

This is the adapter that is sold with the Weihrauch HW100 now:

It's 7 5/8" long 

 

[mercado]

This is the best adapter n it covers the complete top of the condor . lot of screws for a tight hold .. but this cover half of you problem ..without a angle down on that bottle it doesn't matter how high the rings for me was always uncomfortable..the condor bottle drop from pcp tunes was a great upgrade for my condors. 

 

[Ezana4CE]

I’m not sure if installed this UTG adapter (from Pyramyd Air) correctly, but today I installed one of these on a Texan. https://www.pyramydair.com/product/utg-universal-dovetail-to-picatinny-weaver-adapter?a=7311


I haven’t mounted any glass yet and I’m too lazy to take and post a pic of it on the Texan right now. I didn’t read the directions and installed it like I do BKL rings. The first time I slid it onto the Texan dovetail rail and tried to tighten the base screws, the adapter slid loosely on the rail. Then after readjusting the adapter and re-tightening the base screw I thought I had it figured out because it felt snug. However, when I looked at both sides of the mount and how it sat in the forro es or the rail I could see that the beveled lip of the adapter was not evenly snug into the dovetail groove on both sides. One side rested below the groove causing it to rest at a slight angle to one side. Next I backed out the screws, removed the mount, then tightened the base screws one at a time to pull (bend) the mounting base inward. When I did this I could hear the metal flexing slightly at the point where I applied the most tension. I let the mount sit with tension for about a minute before backing the base screws out. I then slid it back on to the dovetail rail and tightened the base screws down. Finally the adapter appeared to fit evenly and securely. I then stowed my Texan. If I remember I’ll post pics after mounting a scope.