Donny's Emperor v3 .30 1/2x20 ..... on a Wolverine HP2 Hilite 303

[LeadFinger]

Hey all,

Is anyone familiar with which adapter would connect these two together...?

I’ve been in an email exchange with DonnyFL for a little over a day now and it’s led me to this post.

Before I send in the adapter for Donny and/or John Hagan to analyze and replicate, I’m wondering if someone might already know what size threads it would need?

It came with a stock fitted Huggett from AOA, just received it today (yay me! )

I sent these pics to Donny (there’s a Huggett Magna in the same shot for comparison) and he said, “I have this one for the wildcat shroud but I think the wolverine is larger: https://donnyfl.com/collections/adapters/products/fx-wildcat-shroud-adapter-with-female-threads “

I figured it would save a week or so of downtime if someone already had experience with this...

Thanks a ton for any input you might have,

-Dan

The shroud:

The moderator:

 

[Adam]

Can you remove the adapter from the hugget?

 

[Macros]

That huggett 'adapter' is just the wolverine's shroud end cap isn't it?

It has a 1/2inch UNF silencer thread on it. You shouldn't need any adapter etc

 

[LeadFinger]

Can you remove the adapter from the hugget?

I can try! 

That huggett 'adapter' is just the wolverine's shroud end cap isn't it?

It has a 1/2inch UNF silencer thread on it. You shouldn't need any adapter etc

Yes it is just the shroud's end cap- so you're familiar with it, it is in fact a 1/2" UNF thread?

So if that's the case, is it the same one Donny was referring to here? https://donnyfl.com/collections/adapters/products/fx-wildcat-shroud-adapter-with-female-threads

Thanks for your time. Yeah my options are to either send it to them to match it up, or to find someone here like yourself that's familiar with it. Possibly pointing me towards the correct piece on his website that will mate the two... Or I could attempt to lose my mind with a caliper.