DonnyFl Sumo Tool

[Papy_Yosh]

I made for myself a tool to take apart and put back together the Sumo, I always had issues realigning the logo taking the baffle apart and was always frustrated with the process.So I made that to take it apart and tighten it. It helps and I don't mark the ends anymore

 

[kayaker]

Well that turned out nice I need one of those too .

 

[Papy_Yosh]

Yes, it came out nicely, it is so much easier to set the logo aligned to the barrel, and the grip is good too

I might add just a bit of roughness on the outside for a better grip. but it works .

 

[mark2cars]

PY...your brain never rests !! What a great idea. Any thought on creating the same for other DonnyFL's.

MNF

 

[edosan]

jaja excelent! I made a similar one to screw and unscrew pressure gauges

 

[Emler]

Very cool. Looks like I should fire-up the 3d printer myself.

 

[Papy_Yosh]

PY...your brain never rests !! What a great idea. Any thought on creating the same for other DonnyFL's.

MNF

I for sure can, I just need them. But i am sure few of them have the same diameter. It would be good to test them on the different donny

 

[Hepotter]

Pappy...I cannot get the pressure gauge out of the gun. While the edges of the Wika gauges are identical, on different guns there is so little space between the air cylinder and the gauge that I cannot get a tool to fit in and unscrew the pressure gauge. I even ground down the sides of my 15/16th socket and I still can't get between that tiny gauge and the sides of the air cylinder tube.

 

[RogerV53]

That tool needs to come with all Donny's moderators.

 

[Papy_Yosh]

Agreed

 

[Bigragu]

Great job, Pappy!