Huben Does Huben GK1 hold pressure well?
- Thread starter invisibleflash
- Start date
One of the dealers had one that was in storage after 1 year, and it was still at the same 300 bar when he put it in storage. So, yes, if it is working properly.
Upvote 0
Upvote 0
I beat the snot out of mine, no air loss here, unless I pull the trigger, there solid pistols.
Upvote 0
i made a post about the gk1 leak i had when it was pretty new.
managed to get it pretty tight again, but after over a year, it slowly leaks again.
have not checked from where yet.
managed to get it pretty tight again, but after over a year, it slowly leaks again.
have not checked from where yet.
Upvote 0
sorry, i would have, if i could find it again. seems like it was not a thread, but most likely actually somewhere in 'your' master thread. can't find it in my listed comments from my profile.
the gun leaked from the power adjuster part. on the new (from luchtbuks) gun this part looked a bit mangled from a wrench even. they send me a new part under guarantee, but ti turned out, with some silicone grease and tightening, the leak could be fixed, so i still have the old part in the gun.
Upvote 0
@grouch-o Is it post #139 in this thread?
Huben - Any issues or problems with Huben gk1 please share your experience
I shot 4 mags back to back to test it out today, and it started double tapping. I noticed the trigger became lighter and even though I was shooting slow it dumped air and jammed. Going to give Kelly a call in the morning. When I first got my GK1 It jammed and dumped air multiple times. I was...
www.airgunnation.com Upvote 0
almost, thanks for finding it.@grouch-o Is it post #139 in this thread?
Huben - Any issues or problems with Huben gk1 please share your experience
I shot 4 mags back to back to test it out today, and it started double tapping. I noticed the trigger became lighter and even though I was shooting slow it dumped air and jammed. Going to give Kelly a call in the morning. When I first got my GK1 It jammed and dumped air multiple times. I was...
here i describe the issue and have some pictures, in later posts, is a resolve.
Huben - Any issues or problems with Huben gk1 please share your experience
my GK1 also has a slow leak (about 100Bar over night), but i am not sure how to check from where it is leaking. i have tried some silicone spray on the check valve screw and around the power adjuster, but i can't see any bubbles so far. i wonder what are the other places and ways to check them...
www.airgunnation.com Upvote 0