HI guys does anybody know the twist rate on a Daystate Airwolf MVT .22 as i can't seem to find this information anywhere.
Thank you in advance!
Thank you in advance!
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Does anybody know the twist rate on a Daystate Airwolf MVT .22
- Thread starter jak26
- Start date
I cannot confirm, but I can say that Daystate will probably turn an answer around for you fairly quickly if you email them. Back when I was trying to find out the same info when I had a Pulsar, I emailed them directly, and they were quick to answer.
At the time, I found that the Pulsar and the Red Wold had the same twist rates. That doesn’t mean that the Airwolf will though, so I don’t want to provide bad info.
At the time, I found that the Pulsar and the Red Wold had the same twist rates. That doesn’t mean that the Airwolf will though, so I don’t want to provide bad info.
Upvote 0
In the Daystates of past I've checked they appear to have used LW production twist rates of @ 17-1
If you can get the factory to respond ? best anwser would be theirs.
If you can get the factory to respond ? best anwser would be theirs.
Upvote 0
Cheers guys, I called Daystate directly this morning with no answer as its Saturday 
I followed with a email directed to technical support which will hopefully be able to provide the answer.
I followed with a email directed to technical support which will hopefully be able to provide the answer. Upvote 0
I don't know how long that barrel is, but you can use a rod with either a brush or tight patch, mark the rod, and see how much it rotates in a full pass through the bore. I've found this accurate if you're barrel is at least as long as the twist rate. If you have a 16" barrel and a 22 twist rate, you have to do some estimating.
Upvote 0