Does a hydro test include a visual inspection?

I just purchased a used 2008 Drager SCBA and dropped it off at local cylinder test place yesterday to get hydro tested and it will be a week before its done. Do they automatically perform a visual inspection as part of the hydro test, or should I have specifically requested a visual inspection? My understanding is some dive shops may require a visual inspection sticker along with a hydro test label. Can anybody educate me? Thanks
 
Thanks Centercut, I hope it passes, it had seen a lot of use by Phoenix FD.

That's why you dont buy them cheap overdue Scott tanks on ebay. They are old and bang up by firefighters. The department toss them away and people try to make money off them by selling it on ebay. Buy a new tank. You be glad you do. Why try to save a few dollars to get an old bang up tanks made 10 or more years ago and who knows what the previous owners done to it. My new Cf tank is so shiny and clean I can eat off of it. I wouldnt eat off of a old firemen's beat up tank. Eww
 
Thanks Centercut, I hope it passes, it had seen a lot of use by Phoenix FD.

That's why you dont buy them cheap overdue Scott tanks on ebay. They are old and bang up by firefighters. The department toss them away and people try to make money off them by selling it on ebay. Buy a new tank. You be glad you do. Why try to save a few dollars to get an old bang up tanks made 10 or more years ago and who knows what the previous owners done to it. My new Cf tank is so shiny and clean I can eat off of it. I wouldnt eat off of a old firemen's beat up tank. Eww

That is very nice that you can afford a new tank. I am more concerned with the air inside of the tank than how shiny the tank looks. I suppose this tank could fail inspection as any tank could, but several folks on the forum have had good good luck with these exact 2008 Phx FD tanks passing inspection. The previous owner was Phoenix Fire Department and I really do not have a question on how they were used. Phoenix contracted with Drager for all their SCBAs in 2008 but cancelled it in 2012 over an issue with the regulator in the facemasks, and retired all of their Dragers shortly thereafter. They replaced them all with another manufacturer (Scott). A local surplus outfit acquired them and has been selling them for what I think is a fair deal.



 
Yes, those are a very good deal. I’ve bought 5 of them over the past year, and every one passed visual inspection and hydro. That tank has four good years left in service, and it’s American Made, unlike many that are being discussed above egging you into buying new. Have no worries, there’s a 99% chance it will pass inspection and hydro. You’ll need one of these...

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F401568527106

1574475960_20531323065dd898b8940f80.46212440_842FDF5B-798F-4278-81EB-C6C921A80E58.jpeg

 
Thanks Centercut, I hope it passes, it had seen a lot of use by Phoenix FD.

That's why you dont buy them cheap overdue Scott tanks on ebay. They are old and bang up by firefighters. The department toss them away and people try to make money off them by selling it on ebay. Buy a new tank. You be glad you do. Why try to save a few dollars to get an old bang up tanks made 10 or more years ago and who knows what the previous owners done to it. My new Cf tank is so shiny and clean I can eat off of it. I wouldnt eat off of a old firemen's beat up tank. Eww

That is very nice that you can afford a new tank. I am more concerned with the air inside of the tank than how shiny the tank looks. I suppose this tank could fail inspection as any tank could, but several folks on the forum have had good good luck with these exact 2008 Phx FD tanks passing inspection. The previous owner was Phoenix Fire Department and I really do not have a question on how they were used. Phoenix contracted with Drager for all their SCBAs in 2008 but cancelled it in 2012 over an issue with the regulator in the facemasks, and retired all of their Dragers shortly thereafter. They replaced them all with another manufacturer (Scott). A local surplus outfit acquired them and has been selling them for what I think is a fair deal.



I bought one and it passed hydro with no problem. Remember, when they hydro test it they are pressurizing it to 7500 psi and measuring how much it expands.