Diy Resetting target plans

.250 steel plate with holes drilled in it, then nuts welded to a bottom plate. Weld nuts onto 5 paddles that are behind the front plate. Run threaded rod between all the nuts and use springs to bring the paddles back to upright.

Then mount it all to a piece of wood that you can attach to anything. 

Can handle 100fpe easily.

20200809_094211.1600547210.jpg
20200809_084900.1600547210.jpg
20200809_084904.1600547211.jpg

 
.250 steel plate with holes drilled in it, then nuts welded to a bottom plate. Weld nuts onto 5 paddles that are behind the front plate. Run threaded rod between all the nuts and use springs to bring the paddles back to upright.

Then mount it all to a piece of wood that you can attach to anything. 

Can handle 100fpe easily.

20200809_094211.1600547210.jpg
20200809_084900.1600547210.jpg
20200809_084904.1600547211.jpg

Excellent idea thanks