Diy Resetting target plans

[JFCHARRUA]

Hi to everyone I'm looking for ideas to make my own resetting targets so if anyone could share projects and pictures, I will be very appreciated, I will used it mostly with my .22 huben.

Sorry for any grammatical error English is not my mother language.

Thanks Juan.F

 

[Glem.Chally]

.250 steel plate with holes drilled in it, then nuts welded to a bottom plate. Weld nuts onto 5 paddles that are behind the front plate. Run threaded rod between all the nuts and use springs to bring the paddles back to upright.

Then mount it all to a piece of wood that you can attach to anything. 

Can handle 100fpe easily.

 

[Dingfelder]

I think you can get some good basics from Hickok45 on shooting steel safely:

https://www.youtube.com/watch?v=0GpKZzt29BM

 

[JFCHARRUA]

.250 steel plate with holes drilled in it, then nuts welded to a bottom plate. Weld nuts onto 5 paddles that are behind the front plate. Run threaded rod between all the nuts and use springs to bring the paddles back to upright.

Then mount it all to a piece of wood that you can attach to anything. 

Can handle 100fpe easily.

Excellent idea thanks

 

[JFCHARRUA]

I think you can get some good basics from Hickok45 on shooting steel safely:



https://www.youtube.com/watch?v=0GpKZzt29BM

Yes a lot of good info, I already see it thanks