Digital Pressure for RAW HM1000x ?

Jump to latest Follow Reply
SpiralGroove

SpiralGroove

Member
Oct 20, 2020
1,683
2,056
Washington, United States
Hey Guys,
Own 3 RAW HM1000x PCP's and all of them read at least 50 bar too high. The other day shooting with a friend, the gauge stayed way above 250 +++ bar the entire day even though we had take about 60 shots.
At first thinking the gauge was broken, then thinking the Sun had something to do with it.

Next morning filled the gun and found she was at 200 bar when gauge still reading 250+++.

Looking to buy a digital gauge and wondering if the one sold at Amazon will fit the RAW?


Seems to be decent if it fits - which I think is pretty standard.

Anybody know for sure?
 
Kirk, those mini gauges rarely read correctly....I sent mine in to Martin recently and had him replace my old gauge as it was off by about 20-30 bar...the new one is 10-20 off...😂. Anyway, the gauge is 23mm, so if Sekmet or other makes a 23mm size, I would say go for it! Was thinking the same but it is not too critical as I know how far my gauge is off. Jeff @ Trenier carries a Huma 23mm analog gauge FYI, I might try one just for the heck of it....
 
Upvote 0
Update:
Bought the digital manometer off Amazon

According to Martin the RAW takes 1/8" BSPP so the thread size isn't a problem.

Received the digital manometer the same day as ordered; (IMO) the problem is it's too big and clunky (fat/tall) to work on a RAW.
It requires me to cut my stock and still ruins the lines of the gun.

Hence: Returning it and likely will buy another inaccurate OEM manometer from Martin.

At least I tried (y)
 
Upvote 0
Those small guages are garbage and should not be relied up. When I fill mine with a premium gauge to 250 BAR, the small gauges goes off the scale. This is a dual regulator I use to tether the gun to my tank and also tune my gun. It allows me to open the regulator and then control plenum pressure externally with the gauge tuning the hammer spring setting or determining if I need a different hammer or spring.

RAW HM1000x gauges (1).jpg
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu