I just got 2 different digital guages. One from topgun and one from huma. The topgun is for my second reg pressure and the huma is for the bottle pressure. The problem is the topgun guage is reading 4.770 bar and the huma is reading 0.000 bar... can anyone tell me what the issue is with these guages? Both are brand new and have fresh batteries and i know for an absolute fact there is air in the gun and the reg is set to 1305-140 based on the analog guage.
Digital guages
- Thread starter Stewy1412
- Start date
Gauge fastened too tight? I know that happened to me when I removed a gauge to bleed air out of a gun. I tightened it down all the way and the gauge wouldn't work. I loosened it just a tad and the gauge started working again.
Upvote 0
I guess i could try that but then it wont be aligned at all. Do you know if the is a way to rotate the display?
Upvote 0
I think you can have a little slack in how far down you have to tighten the gauge, so just stop when it's aligned? That worked for my Dreamline reg gauge.
Upvote 0
Thats the thing, i only had to go an eighth of a turn clockwise from hand tight to get boyh of them perfectly aligned so in order to loosen them and still have them right side up, id have to go aaaaall the way back. I guess the rear guage would only have to go half way cuz im not too concerned with the direction of that one but the bottle pressure should be right side up
Upvote 0
I don’t know about the Huma or Topgun digital gauges, but you can invert the display on the Sekhmet. I suspect you can do the same on those two.
Upvote 0
I emailed both companies, huma gets back to me, if not the same day, the next, every reply i send. Topgun... still havent heard from them on the first question i asked. Probably just going to return that gauge
Upvote 0