Hey Folks,
Recently, during several shooting sessions, I started noticing a change in my STD while shooting JSB 24.54 Kings, so l cleaned the barrel and started some shot string testing. Sure as the sun comes up, the shot strings showed a slight inconsistency in the normal STD. So I opener her up and found this, the edge of the power wheel at position 24 was chipped out. See picture below, you might have to enlarge it to see it better.
I believe it was cause due to the internal locking 1.5 mm allen screw that holds the pretension adjustment screw boss had came out and fell on the table. No fault to fx, I might have forgotten to snug it up after cleaning the hammer.
Ok, so no big deal. Hopped on the phone, called a very reputable airgun shop, whom i had bought the Crown mk2 from and ordered a new one, paid and got it 2 days later. When i opened the box i found not the 1 through 24 which it came with but the numbered and lettered one.
What are your thoughts, should I accept the 1234abcd or request the same type the Cmk2 came with? Pros and cons , 1-24 vs 1234abcd power wheel.
Thanks ,
Mike
Recently, during several shooting sessions, I started noticing a change in my STD while shooting JSB 24.54 Kings, so l cleaned the barrel and started some shot string testing. Sure as the sun comes up, the shot strings showed a slight inconsistency in the normal STD. So I opener her up and found this, the edge of the power wheel at position 24 was chipped out. See picture below, you might have to enlarge it to see it better.
I believe it was cause due to the internal locking 1.5 mm allen screw that holds the pretension adjustment screw boss had came out and fell on the table. No fault to fx, I might have forgotten to snug it up after cleaning the hammer.
Ok, so no big deal. Hopped on the phone, called a very reputable airgun shop, whom i had bought the Crown mk2 from and ordered a new one, paid and got it 2 days later. When i opened the box i found not the 1 through 24 which it came with but the numbered and lettered one.
What are your thoughts, should I accept the 1234abcd or request the same type the Cmk2 came with? Pros and cons , 1-24 vs 1234abcd power wheel.
Thanks ,
Mike