Did you know a Hatsan could do this? (Factor RC first groups)

[kaylaindy]

Hey guys, Here are the first 2 groups I shot at 35 and 50 yards with the new factory regulated Factor RC (Regulated Carbon). Awesome gun! …more info here: https://hatsan.com.tr/product/factor-rc/

5 shots 35 yards 

5 shots at 51 yards

Those are just the first groups I shot (from my review video), not the "best" groups of the day…those were the "only" groups of the day. (besides sighting the gun in.) 

That is just the "out of the box" tune. It also has externally adjustable hammer spring, transfer port, and regulator. Cool tensioned barrel system too.

Happy shooting! -Nate @ Airgun Channel

 

[allenbowles]

do not mess with it. great shots.

 

[willy]

Holly cow bat man" do ya think Bug a Boo will be OK"

 

[biohazardman]

I think that it should. I require that of all of the PCP and Co2 guns I tune and shoot often. I expect my springers to shoot nickel and quarter size groups at the same range. If the guns can't shoot that well I tune them until they can or I use them as parts guns as that is all they are any good for.

 

[Raden1942]

Dang that's a sweet hatsan! I didn't know that existed. I must be slipping. 

 

[AncientSword]

Did you run that over a chrony yet? 

It looked to me like their power numbers are a little low, I would expect more power.

 

[Jimmy001]

aeac shot the hatsan airmax and shot a group half that size at 50 yards it did .31" center to center, and it's not regulated.So wat you have there is not impressive. Get up on you tube and see what there 42 flb 680 dollar gun can do.What you have there is a little weak..I'd rather get the air max and a regulator .I have one and it shoots a ragged hole at fifty . Maybe your barrels dirty.

 

[Jimmy001]

Thats my version of an impact .Has fx heavy liner 25 cal 700mm,shoots 38.5 nielson slug 1010 fps .1/4 inch center to center.It's regulated ,gear train all had to be upgraded.I have an impact quality gun ,and i don't have to pull a lever it's semi or full auto.You can put ten slugs in this guns mag select full auto ,let them fly and the group will be tighter than that gun.Anyone who has one of these knows how good it shots stock with pellets.Do not shot slugs out of a stock gun you will break the slide and the gearand they will know how it happened and will not cover it

 

[Jimmy001]

I just watched 2 sub 400 dollar hatsans do that on aeac as far as accuracy goes that a 4 hundred dollar accuracy,And those guns are unregulated.Really.

 

[Guest]

Not bad!, but let's see that at 100yrds!

 

[kaylaindy]

Did you run that over a chrony yet? 

It looked to me like their power numbers are a little low, I would expect more power.

Yes, I think it was only around 900 FPS. 

Not bad!, but let's see that at 100yrds!

That's for sure. I hope it doesn't fall apart at 75 yards! 

do not mess with it. great shots.

My thoughts exactly. I'm not one to "tune" guns if I don't have to. I definitely won't be touching any dials on that gun...except maybe the transfer port (3 settings). 

 

[Mrshosted]

Id completely expect that any Hatsan could shoot like that if put in the right hands. I've been preaching for years Hatsan has a great gun. They just need some love with the tunes, and weight dept. How much does that gun weight?

 

[kaylaindy]

How much does that gun weight?

just 7.9 pounds!

 

[Dano46]

What kind of ft-lbs can it do on max power in .22

 

[kaylaindy]

What kind of ft-lbs can it do on max power in .22

Not sure. At the factory tune it only shot 18gr pellets about 900 fps. I didn't want to adjust it. Some stats are in the video.

Here is the video: 

https://youtu.be/5hp2KYA_0Gg

 

[mk1rs]

ive got the rc also very good and accurate so far just wish it come with the adjustable reg and hammer spring as its UK spec we dont get the option off adjustability



https://photos.app.goo.gl/Q9xekGFhGC8R4uETA

 

[Guest]

Finally Hatsan has made a gun that is pleasing to the eye.

 

[knifemaker]

With Hatsan, the question isn't can it do it, more of "How long can it do it". The build quality inside, where you don't see the workmanship is usually sub par. Often terrible.