Does anyone know for certain how to remove the AirBug's muzzle device? Is the Airbug's barrel threaded like the Chaser? If threaded, is it RED loctited on there like the Chaser's moderator? If it is possible, I would like to use a Diana moderator (same unit the Chaser "factory" rifle barrel has) on the Airbug pistol.
Diana Diana AirBug Muzzle Protector Removal
- Thread starter CBKidd
- Start date
Mine has a grub screw behind the front sight. Loosen it enough and the muzzle device and front sight simply slides off. No loctite seemed to be involved. I just removed mine to put a barrel band on. Easy job, less than 5 minutes.
Upvote 0
I've got 3 Chaser pistols and none of them have a grub screw holding the front sight on. Looks like the sights are loctited on. The muzzle caps are not loctited and simply unscrew. The muzzle caps are screwed on the barrel and if loctited on, will prevent the front sight from being removed even if it's loose.
Last edited:
Upvote 0
i am going to have to seen everyone to Snowpeak School LOL
the Bandit and Chaser have plastic front sight that are indexed and are friction fit
the Airbug has a metal front sight with a removable blade but as mentioned a grub screw on the bottom side and i don't know if it threaded but i doubt it
Airbug and Chaser barrels are the same the Bandit barrel is also the same but 1.2 inches longer for the HPA tank
so you can use a silencer on the Airbug barrel with its 10mm-1 thread or get an adapter to use 1/2-20 threaded units
i use these very inexpensive adapters
https://www.ebay.com/itm/285088594905
the Bandit and Chaser have plastic front sight that are indexed and are friction fit
the Airbug has a metal front sight with a removable blade but as mentioned a grub screw on the bottom side and i don't know if it threaded but i doubt it
Airbug and Chaser barrels are the same the Bandit barrel is also the same but 1.2 inches longer for the HPA tank
so you can use a silencer on the Airbug barrel with its 10mm-1 thread or get an adapter to use 1/2-20 threaded units
i use these very inexpensive adapters
https://www.ebay.com/itm/285088594905
Upvote 0
My Airbug barrel is not threaded. Loosen that grub screw and point the gun muzzle down and the front assembly literally falls off.
Upvote 0
my mistake on the Airbug they are using the CP1 barrel and that makes sense because that is the CP1 front sight i beg your pardrone
Upvote 0