I have been given the daunting task of modifying a filling kit for the rest of a dumb family to use.
The thing is that the rifle is 200bar~2860psi max. and the tank when full runs above 300bar~~4290psi.
So most "micro bore" hoses i've seen runs 2mm~.078". That aint going to cut it for dimwits!!!
I am thinking more in the line of a .25mm~.001" orifice?
Drill and tap the fill probe for a grub screw and drill said screw with a .25mm~.001" hole.
No runaway even if the bottle valve is opened fully, just a nice slow fill.
What say yee?
The thing is that the rifle is 200bar~2860psi max. and the tank when full runs above 300bar~~4290psi.
So most "micro bore" hoses i've seen runs 2mm~.078". That aint going to cut it for dimwits!!!
I am thinking more in the line of a .25mm~.001" orifice?
Drill and tap the fill probe for a grub screw and drill said screw with a .25mm~.001" hole.
No runaway even if the bottle valve is opened fully, just a nice slow fill.
What say yee?