After looking at the pictures of the delta wolf, and its sliding scope rail... Would it be possible to remove the sliding scope rail and just put scope mounts on top of gun? Seems like you could eliminate all the scope height that is not a favorite of bullpup rifle styles.
delta wolf scope rail
- Thread starter whitetail17
- Start date
Seems like it could be possible provided that's an 11mm dovetail it's sliding on, and that you can find rings high enough to have the objective bell clear the shroud. You might have issues with eye to scope alignment if you mount it that low too.
Upvote 0
Thinking ahead? 
If it is dovetail you could use something like this adapter. It will give you some height.
Upvote 0
Has anyone found a good dovetail adapter for the DW to replace the scope rail? This is my setup and I really like the ability to just take on/off the night vision for transport so the quick release mount will stay. But with the factory mount and the quick release it sits just a tad too high.
Would this work:
Would this work:
Upvote 0
Never mind. I have forgotten that I also had a lower quick detach mount. Much better with this.
Upvote 0