Delta Wolf does not change speed?

[whitetail17]

Ok. I got to play with the adjustments this afternoon on my new delta wolf. Went factory settings selected 

.30 cal 

23" barrel

50.15 pellet

880 fps (my reg is set to 148-152 )

speed showed every time all around 880 fps.

unlocked menu, slid to right for speed adjustment only, selected 860 fps, pressed it, gun made the noise it does when something is changed.

shot it 40 times and lowest speed was 875 fps. Tried it many times threw the menu, no speed change. Menu will display the speed it is programmed for correctly , but pellet speed 

will never get to that speed. 

What am i doing wrong? I watched the AOA tutorial several times, seems pretty simple .

 

[Centercut]

How about a photo of the screen? Thanks...

 

[JohnnyPDX]

It's battery operated, what could go wrong.

 

[whitetail17]

 

[whitetail17]

got it.



you must drop down in large increments first, like 700, then build up . It will not drop in small increments .

 

[whitetail17]

never mind, it still does not work

 

[fe7565]

Assuming it's not a software issue....are the infrared LEDs obstructed, fouled up? That used to be a problem with the Airwolf MVT's 12 years ago. I believe they put in a plastic clear tubing to prevent that. Check to see if it's clean. Also, check the wiring to it.