- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Degassing a Thomas
- Thread starter blam62
- Start date
Hey Mike. I just purchased SN 275 assembled by Will. I will be flying with it and want to know the best way to do this without damaging it. Thanks
Bob
Upvote 0
Your model has a reg clamp so you can let the air out through the fill fitting. Connect your fill tank to the gun, add air until you hear the valve make a pop noise which will indicate it is open….then shut off your tank valve…stand the gun upright and very slowly open your bleeder valve just enough to hiss the air out. Obviously if you create too much air flow…the valve will close and require you to repeat the process. Let it hiss out slowly. Might take 15 minutes.
Mike
Mike
Upvote 0
Perfect. I appreciate the help!!
Another quick question. Do you recommend your pellet plunger for FT guns or just the BR guns?
Bob
Another quick question. Do you recommend your pellet plunger for FT guns or just the BR guns?
Bob
Upvote 0