how are you guys de gassing the mrod after you remove the long striker in the hammer, de gassing tool is too short now, degassing tool is too short now with the peek striker
I pull the end cap and hammer spring and use a short piece of 1/2” wood dowel in the hammer, strike dowel against the floor making sure the transfer port is facing away from your leg ( if breech is removed). Degassed in 2 seconds.
For any of my guns that have an RVA, I replace the hammer spring with a solid spacer (dowel, etc) cut to the appropriate length. Then simply screw in the RVA until the hammer opens the valve and degases the gun....
For guns I work on frequently I fabricate some form of simple degassing tool such as the one below which works on most any 7/8 tube gun such as Disco's, 22xx, QB's, Gauntlets, etc....