- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Decided I Wanted a CNC Router For Stock Making
- Thread starter Loren
- Start date
Thanks Matt, I am having a lot o fun with the CNC. I cut some more fixture tooling pieces this evening.
Upvote 0
Thanks Dasman!
Cutting base plates for use in the recoil pad mold.
Boring holes here
https://youtu.be/LnS6L4MON-4
Starting to profile the parts
https://youtu.be/s2T_KzxY-Xc
Holes bored and screws added to hold the parts down once they are cut free from the sheet.
Parts being profiled
Parts complete and ready to pull off the fixture
Inserted in the base of the mold.
Cutting base plates for use in the recoil pad mold.
Boring holes here
https://youtu.be/LnS6L4MON-4
Starting to profile the parts
https://youtu.be/s2T_KzxY-Xc
Holes bored and screws added to hold the parts down once they are cut free from the sheet.
Parts being profiled
Parts complete and ready to pull off the fixture
Inserted in the base of the mold.
Upvote 0
Using the fixture and clamps I cut earlier this week. Cutting an aluminum bracket.
Indexed and clamped ready to be cut.
Holes drilled and bored to size.
Parts completed after profiling.
Indexed and clamped ready to be cut.
Holes drilled and bored to size.
Parts completed after profiling.
Upvote 0
Nice work, Loren 
Can't wait to see the finished product.
What type of material is that thin plastic?
Can't wait to see the finished product.
What type of material is that thin plastic?
Upvote 0
A piece of 360 brass and a real quick roughing
https://youtu.be/wB4vv3GBf5E
Starting the detail work with a 1/16" end mill. This is going to take a while !!!
https://youtu.be/nRWKsguC03E
https://youtu.be/wB4vv3GBf5E
Starting the detail work with a 1/16" end mill. This is going to take a while !!!
https://youtu.be/nRWKsguC03E
Upvote 0
Yes, you are right, and with the small cutter, rigidity would not be a problem. The brass machined really nice.
Upvote 0
Wow I am really impressed. I didnt even know you could make your own recoil pads! that just blew my mind.
Upvote 0
Put the brass banding iron on the stove top for a bit to get it hot and give it a test. I'm happy with it!
Upvote 0
A little Saturday morning cutter cam footage.
https://youtu.be/HmI605RYc9Y
https://youtu.be/uhY90xyOrlM
https://youtu.be/HmI605RYc9Y
https://youtu.be/uhY90xyOrlM
Upvote 0
Thanks for sharing your journey. I’m surprised you are cutting metal on a wood framed machine. What are your typical cut depths and step overs? What do you estimate your precision tolerances are?
Upvote 0
I switch to a 3 flute and that smoothed out the climb cutting on the roughing passes.
On the aluminum was using an .060 axial depth of cut and an .025 radial depth of cut. Slow much gets the job done.
On the aluminum was using an .060 axial depth of cut and an .025 radial depth of cut. Slow much gets the job done.
Upvote 0
It's been a real busy spring and early summer so far, but getting some time cutting a green mountain camo laminate stock.
Upvote 0
Wow, this is awesome stuff! I know a lot of Taipan Veteran owners don't like the blocky stock. I bet we could round up 10 of them that would go for a more svelte design.
Upvote 0